Posted Tue Jul 22, 2003, 5:04am Subject: Steaming time on the 240v version
I don't own the zaffiro, but Paul Haddon, who's also a coffeegeek user was kind enough to demonstrate his (240v) Zaffiro for me, and the steaming wait was over 1:30, so I don't think you can just blame the 110v power for the wait. More likely to be the result of all that water in the boiler - great for temperature stability - meaning it takes a long time to cool down when making espresso, but also a long time to heat up for steam.
Hi David. I didn't mention the Techno, because my understanding is the model isn't currently being manufactured - they have it on "hold' until this fall because of some production problems; again, this was my information as gleaned from the SCAA show in Boston. If this information is incorrect and the machine is being made today, and shipping today, I'll make the edit change.
Loved your review, Mark. I too, own a 240V version and noticed the same delay in getting ready to steam... Picked up some good suggestions, like bleeding false pressure when flicking the steam switch (I had read about bleeding for other machines, didn't think it mattered here. Just one question - until now, I had been backflushing after every session... apparently overkill?
Yeah, I think backflushing after every shot is overkill, and can lead to premature deterioration in the gaskets and plumbing inside the machine. Doing the "portafilter wiggle" should be more than sufficient between shots.
Posted Thu Jul 24, 2003, 6:41pm Subject: Upkeep and operation
Finally, the detailed review! Your first look prompted my Zaffiro purchase, and never was a great espresso made easier. I'll keep a laminated copy of the cogent parts of your review close to The Machine. Absolutely a great review of a great _espresso_ machine. ( If I want milk, I'll drink milk.)
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.