Posted Sun Jun 23, 2013, 10:16am Subject: Recommended Behmor settings for Sweet Maria's monkey blend.
Hey folks I've been fooling around with a new Behmor and I'm still scratching my head a bit at the roast profiles. So I decided to stick with one blend and see what happened. Before I ran out I was playing with Sweet Maria's monkey blend to see if I could master that but I was wondering if anyone had found a preferred profile for it already that they'd be willing to share.
Here's what I did:
1/4 batches using 1/4lb P1 A: I did a couple of batches like this but it seemed like the beans barely got to first crack using this setting. The roast was very light and not very tasty. I did try upping the time at the end but ended up butting up against the max time and still not seeming to get close to 2C.
1/4 batch using 1/4 P2 B: I roasted using this setting but again 1C was right up towards the end of the roast. I ended up extending the time up to the max. The roast was darker than the previous, probably almost a FC, but still did not ever seem to reach 2C.
1/4 batch using 1/2 P2 B: This setting seemed to work the best because of the obviously longer time of the roast. I adjusted the time down at 1C as per the "rosetta stone" directions, but noticed as time was running out that I still didn't seem to be hitting 2C. I ended up extending at that point another minute and a half or so for 2C to start. After the first couple cracks of 2C I hit the cooling button to cool it off. This method seemed to give a result much closer to the FC or FC+ that I was looking for.
I'm wondering if I'm completely off in my methods or If it's just a matter of more experimentation. I've noticed that a lot of posters end up shorting the weight in order to progress the roast further (i.e. 10 oz in a 1 lb roast).
Woody Senior Member Joined: 26 Jan 2004 Posts: 611 Location: Hood River, OR Expertise: I love coffee
Espresso: La Spaziale Vivaldi I Grinder: Mazzer Major Vac Pot: Hoover Drip: yuck Roaster: Behmor
Posted Sun Jun 23, 2013, 5:46pm Subject: Re: Recommended Behmor settings for Sweet Maria's monkey blend.
I'm no expert on the settings, but I'm pretty sure you want to use either P3 or P4. The way I understand it for P3 you use C, D for P4. When roasting 1/4 pound you can choose the 1/2 lb setting and this will allow plenty of time.
Posted Sun Jun 23, 2013, 7:49pm Subject: Re: Recommended Behmor settings for Sweet Maria's monkey blend.
I regularly roast Monkey Blend for my son. Batch size is 10 oz. Settings are 1 lb, P1, B.
The roast normally reaches 1CR at 12:45 min and I go to cool at 15:30 min and around 1 min of 2CR occurs during cooling. I could have roasted another 4:30 min if necessary. In other words, roasting 10 oz ...but setting it at 1 lb ...gives me plenty of roast time to be well into the 2CR.
I have done this over and over again through about 7 lbs of greens and am about to open another 5 lb bag.
I hope you are using a Kill-A-Watt Meter to monitor your power. Under no-load conditions I have between 118 and 121V.
I do 10 oz roasts because a) I get 3 roasts out of a 2 lb sample and 8 roasts out of a 5 lb bag and b) because the roast nets out (after water loss) at slightly more than half a lb (say 8.35 oz) which matches my son's usage over 2 weeks.
pmaru77 Senior Member Joined: 21 Nov 2008 Posts: 63 Location: San Diego Expertise: I love coffee
Grinder: Maestro Plus Vac Pot: Yama Drip: KRUPS 4 cup (Melitta #2) Roaster: Behmor Roaster
Posted Sun Jun 23, 2013, 11:54pm Subject: Re: Recommended Behmor settings for Sweet Maria's monkey blend.
Rule of thumb with this machine is P! with 1/2 lb of beans will start crack at about 12 minutes. Once C! starts, it should only take 2'15'' To get to where c2 will start. So I usually kill (cool) at 2 2/4 munutes after hearing fisrt cracks going on. This is from the guru inventor.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.