I agree with the above, never the less I'll post my personal opinion, based on my personal experience (2years+, AT LEAST two roasts a week, 350g per roast):
copy/pace from another post
This is my personal opinion
Timing and temperature is very critical!! Try to shag a temperature probe i your roster, such that it penetrates the beans at all times!
04 min aprox. 135 °C AT LEAST 120 °C, drying period, some might argue for a higher temperature but not the timing! If drying happens to quickly the end product will taste grassy, however if it takes to long you loose plenty of flavor! Such that if you dry for 2min longer you loose AT LEAST 50% of flavor -->> personal opinion!!
08 min aprox. 185 °C First crack begins.
10 min aprox. 200 °C First crack peeks.
12 min aprox. 205°C First crack ends, the been develops complex flavors, acid evaporates and/or turns into bitter/spicy flavors.
14 min. End of roast: 205°C city, 210°C city+, 215°C full city.
Stick to city or city+, use full city only as worst case scenario! If the been taste sour at city, city+, then change the been mate :),,,
Good luck mate :), it ain't easy... BUT IT PAYS OFF :D
DavecUK Senior Member Joined: 21 Sep 2005 Posts: 1,326 Location: UK Expertise: I love coffee
Posted Tue Sep 3, 2013, 7:15am Subject: Re: Time vs. Temperature in Roasting
I think in the above post this is pushing the roast along a little too quickly....especially for a small home roaster, where results are likely to not be as good as in a large 5-20kg commercial roaster....even then it's a bit quick.
Killovicz Senior Member Joined: 10 Sep 2010 Posts: 29 Location: Copenhagen Expertise: I love coffee
Espresso: Gaggia :) Grinder: Vario Home Vac Pot: Moka Pot Drip: AeroPress Sucks Roaster: Custom Made Roster
Posted Tue Sep 3, 2013, 12:19pm Subject: Re: Time vs. Temperature in Roasting
I've tried many different combinations and I've came to this conclusion..
If you "only" have a small commercial home roster then I'm very sorry :(. It's not my intention to make anyone feel bad about their machines nor to discourage anyone or in any other way to spoil somebody's day. I apologize up front.
Personal opinion -> Behmore is not really for "espresso roasting" never the less it's a fantastic machine for a lazy type of guy who brews a lot, perhaps only drink latte and cappuccino once in a while and never really drinks pure shots.
Gene/hottop should be able to roast at that speed but only perhaps 100 grams, perhaps even less :(. That's like 0.4kg/hour. I really doubt that anyone would mind the faff, not in the long run. However if own one of those -->> then give it a try mate :)
Then if you find out that you need a bigger roaster you can:
Build one your self -> there are plenty drawings around, ain't that hard, doesn't need to be sophisticated, only needs a chamber, heat, thermometer and some sort of stir/turning mechanism.
Or you can buy some custom made home roaster, I've seen some around that looked reasonable.
The least you could do is get one these --> Click Here (www.sweetmarias.com) or something alike --> then shag a temperature probe in there some how, I do not know how I don't have one of those, but it should be easy, perhaps drill a hole in the side or the lid. It's just VERY important that the probe penetrates the beans at all times!!!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.