Joel_B Senior Member Joined: 9 Oct 2007 Posts: 1,823 Location: Pacific NW Expertise: I love coffee
Espresso: Astra Mega II Grinder: Mazzer SJ, Virtuoso Vac Pot: Yama 5 cup Drip: nope, french press Roaster: Behmor, WP, BBQ drum
Posted Sun Mar 28, 2010, 9:54am Subject: Re: Ascaso Dream is dripping
To smithman and mike, sorry I didn't see your posts earlier. Mike, glad you were able to get it. Smithman, if you haven't gotten it from someone else yet just send me an email and I'll send you the file.
It's my understanding that the Ascasos use the same guts, but with the introduction of the "professional" line and thermoblock machines, etc. that may no longer be the case. Please let us know if it works for non-dream machines as well.
Thanks. I've reduced the PDF image quality settings (and taken out the fonts) to compress the file below the 75 KB limit. Here's the text:
Ascaso Dream Steam Valve Adjustment This guide outlines the steps required to perform an adjustment of the steam knob on the Ascaso Dream espresso machine. This adjustment should solve the issue of the steam knob not turning off or on properly. You will be making an adjustment to the “stops” on the steam knob shaft. The stops can fall out of adjustment if the steam knob is turned too far in either direction. When opening and closing the steam knob, use caution that you do not open it too far, or over tighten the knob when closing it.
A short Phillips screwdriver
Allen Wrench – size #2 These tools are simple and can be found at any hardware store.
Unplug your machine from the power outlet.
Behind the group head on each side are 2 #2 Phillips screws. Remove them. These screws are fairly long, so it will take some time to completely remove them.
Lift the top off and set aside on a cloth towel.
Rotate the steam knob to open by turning towards you and you will see a long black threaded screw come up. This is the Allen screw.
Loosen the Allen screw with your # 2 Allen wrench by turning the screw counter -clockwise.
Hold the screw and rotate the steam knob clock-wise about a 1/8th turn, then release the screw and see if the knob will shut off. If it does, then rotate the knob to open until the screw comes up to the top (pointing straight up towards the ceiling) and then tighten the screw so that it is snug. Do not over-tighten the screw.
Check that the valve is closing by turning the coffee switch (right switch) on and then the power switch on (middle switch) in that order. If water comes out the group head, the adjustment was successful. If not, unplug the machine and repeat #s 3, 4, & 5.
Test. If fixed unplug the machine and go to the last step.
Replace the top but check that the extension screws in the cover are secure before placing the cover.
Simon, it's my understanding that CG no longer supports file postings such as your zipped .pdf, so the file you provided will not work. Thanks for posting the text though. Hopefully that will be enough for most.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.