Our Valued Sponsor
OpinionsConsumer ReviewsGuides and How TosCoffeeGeek ReviewsResourcesForums
Coffee: Machines and Brewing Methods
Confessions of a Brikka Lover
Rancilio Silvia - How to
Step by step guide for easy brewing and steaming with the Rancilio Silvia
www.seattlecoffeegear.com
 
Not Logged in: Log In to Postlog in
New Topics updated topics   New Posts new posts   Unanswered Posts new unanswered  
Search Discussion Board search   Discussion Board FAQ faq   Signup sign up  
Discussions > Coffee > Machines > Confessions of a...  
view previous topic | view next topic | view all topics
showing page 148 of 160 first page | last page previous page | next page
Author Messages
RaptorHornet
Senior Member
RaptorHornet
Joined: 11 Jun 2011
Posts: 94
Location: Manila, Philippines
Expertise: I love coffee

Grinder: Kyocera CM-45CF
Vac Pot: Hario Siphon, Brikka
Drip: Melitta 1cup, Aeropress
Posted Sat Jun 25, 2011, 7:39am
Subject: Re: Confessions of a Brikka Lover
 

A question to all Brikka experts:

"Cheapo <$100 Espresso Machines" vs. "The Brikka"

Which one makes a better cup?

 
Do what you love to do and give it your very best
back to top
 View Profile Link to this post
frankthecrank
Senior Member


Joined: 22 Sep 2010
Posts: 102
Location: niagara falls, ny
Expertise: I love coffee

Posted Sat Jun 25, 2011, 7:56am
Subject: Re: Confessions of a Brikka Lover
 

RaptorHornet Said:

A question to all Brikka experts:

"Cheapo <$100 Espresso Machines" vs. "The Brikka"

Which one makes a better cup?

Posted June 25, 2011 link

Brikka-by all means. I'll go one even further---cheap 3 cup Bialetti Moka Express pot over $400 Gaggia Classic!! There. I said it. And I finally have regained my self respect. (tongue in cheek-sort of).
back to top
 View Profile Link to this post
Enkerli
Senior Member
Enkerli
Joined: 1 Aug 2004
Posts: 711
Location: Montreal, Qc
Expertise: I love coffee

Espresso: (At cafés, not at home)
Grinder: Hario hand grinders
Vac Pot: (Moka Pot) Bialetti Brikka
Drip: Steep and release pour-over
Roaster: iRoast-2
Posted Sat Jun 25, 2011, 10:04am
Subject: Re: Confessions of a Brikka Lover
 

Some entry-level espresso machines produce decent coffee, but they're not in the sub-100$ range.
And, unless your barista technique is really good and you have excellent control over every factor, chances are that you'll make more enjoyable moka pot coffee than home espresso regardless of machine. I've had really nice shots from a variety of home machines, including some using a pressurized portafilter. But those shots were prepared with great care and, in the case of machines with pressurized portafilters, were an exception to the rule.
Still, most of these are in the 250—500$ range. The only sub-100$ “espresso” machines I've seen were using steam, not pressure. I did use a 30$ Braun gadget, a number of years ago. It couldn't produce espresso and even the milk frothing wasn't good, but it was somewhat entertaining.

 
Alex
http://enkerli.com/
back to top
 View Profile Visit website Contact via AOL Instant Messenger Contact via ICQ Link to this post
RaptorHornet
Senior Member
RaptorHornet
Joined: 11 Jun 2011
Posts: 94
Location: Manila, Philippines
Expertise: I love coffee

Grinder: Kyocera CM-45CF
Vac Pot: Hario Siphon, Brikka
Drip: Melitta 1cup, Aeropress
Posted Sat Jun 25, 2011, 6:23pm
Subject: Re: Confessions of a Brikka Lover
 

frankthecrank Said:

Brikka-by all means. I'll go one even further---cheap 3 cup Bialetti Moka Express pot over $400 Gaggia Classic!! There. I said it. And I finally have regained my self respect. (tongue in cheek-sort of).

Posted June 25, 2011 link

Haha! I think you just shook a beehive there.

Enkerli Said:

Some entry-level espresso machines produce decent coffee, but they're not in the sub-100$ range.
And, unless your barista technique is really good and you have excellent control over every factor, chances are that you'll make more enjoyable moka pot coffee than home espresso regardless of machine. I've had really nice shots from a variety of home machines, including some using a pressurized portafilter. But those shots were prepared with great care and, in the case of machines with pressurized portafilters, were an exception to the rule.
Still, most of these are in the 250—500$ range. The only sub-100$ “espresso” machines I've seen were using steam, not pressure. I did use a 30$ Braun gadget, a number of years ago. It couldn't produce espresso and even the milk frothing wasn't good, but it was somewhat entertaining.

Posted June 25, 2011 link

Yeah. I can only imagine that steam machines aren't gonna be any different from stovetops, only more expensive.

Anyway. I asked because two family members apparently bought a cheap espresso machine and being the only guy in the whole house who knows a thing about coffee, I was immediately dragged along to figure out how to use the bloody thing (They apparently bought it without being given any hint of instruction). Another reason was because I also noticed that the prices of these budget machines are closer to that of classic stovetops now than they did before and I was wondering if the quality of these machines are also being similarly affected. It isn't really affecting my decision to invest in another stovetop though. Portability was the main reason why I made my decision after all so unless they started selling non-pod Handpressos here, I'm still going for the 2-cup brikka.

Just to talk a bit about the machine: It's a complete meh but it seems to be a pump machine, surprisingly. The brand doesn't seem to be well known so I had to dig up info about it and found this Click Here (u.lasoo.com.au) The portafilter isn't pressurized but the baskets it came with are oddly shapped. They almost look like those used for pods but they aren't. This alone isn't the problem but the size of the largest basket. I don't have a proper scale yet but I'm almost convinced that the thing won't be able to store 15g of ground coffee. The steam wand seems to be decent enough since I still managed to do a good job with the milk foam even without the rubber frother installed.

And.....that's about it. If there's anything I could say about all these it would that I absolutely did not expect my espresso journey to start this early and especially not this way. But hey, I guess having experience this early might be a positive thing before I get myself a Silvia or, better yet, a europiccola.

 
Do what you love to do and give it your very best
back to top
 View Profile Link to this post
Enkerli
Senior Member
Enkerli
Joined: 1 Aug 2004
Posts: 711
Location: Montreal, Qc
Expertise: I love coffee

Espresso: (At cafés, not at home)
Grinder: Hario hand grinders
Vac Pot: (Moka Pot) Bialetti Brikka
Drip: Steep and release pour-over
Roaster: iRoast-2
Posted Sat Jun 25, 2011, 7:02pm
Subject: Re: Confessions of a Brikka Lover
 

69AUD for a pump machine with a non-pressurized portafilter? Sounds like something I might like to try. Might be difficult to find a tamper is the portafilter diameter is non-standard, but Reg C. Barber could do a custom one. ;-)
It could actually be a decent way to practice your barista skills.
Funny you mention the Silvia and EuroPiccola. They're the ones I almost mentioned in my previous message. I actually haven't tried an EuroPiccola myself, but Ken has been using one for quite a while. Silvias are cool, especially since they've been adopted by coffeegeeks. With a PID, it can be especially interesting.

If everything goes according to plan, I should be able to get a decent espresso machine and grinder within the next year. Not that I feel that strong an urge for an espresso setup, but it's an important step, in a coffeegeek's life.
What would be even nicer is if I can source Pacific Natural Foods barista series soy blenders.…

 
Alex
http://enkerli.com/
back to top
 View Profile Visit website Contact via AOL Instant Messenger Contact via ICQ Link to this post
Enkerli
Senior Member
Enkerli
Joined: 1 Aug 2004
Posts: 711
Location: Montreal, Qc
Expertise: I love coffee

Espresso: (At cafés, not at home)
Grinder: Hario hand grinders
Vac Pot: (Moka Pot) Bialetti Brikka
Drip: Steep and release pour-over
Roaster: iRoast-2
Posted Sat Jun 25, 2011, 7:21pm
Subject: Re: Confessions of a Brikka Lover
 

Ha! So this is what you got!
Click Here (www.sulit.com.ph)
Does look interesting. Just hard to look for it elsewhere, especially for a French-speaker («maison» means “house” or “home”, so it's too common to serve as a keyword). It does come with a little plastic tamper-like thingy, so that might help.
Now, 15 bar sounds unlikely and even undesirable, but maybe the pump is capable of delivering the standard 9 bar?

Oh, and by the way… I'm not dogmatic in my stance against cheap espresso machines. Not knocking them before I try them. But what I've had so far from a variety of machines, including some relatively expensive ones (such as Gaggia and Saeco entry-level models) wasn't necessarily that impressive.

Other non-electric espresso devices might also work well. A friend swears by Presso and MyPressi and such. Can't tell if I might enjoy those until I try them. Wouldn't invest in one before having a really nice shot from it.

 
Alex
http://enkerli.com/
back to top
 View Profile Visit website Contact via AOL Instant Messenger Contact via ICQ Link to this post
RaptorHornet
Senior Member
RaptorHornet
Joined: 11 Jun 2011
Posts: 94
Location: Manila, Philippines
Expertise: I love coffee

Grinder: Kyocera CM-45CF
Vac Pot: Hario Siphon, Brikka
Drip: Melitta 1cup, Aeropress
Posted Sun Jun 26, 2011, 6:27am
Subject: Re: Confessions of a Brikka Lover
 

Enkerli Said:

Funny you mention the Silvia and EuroPiccola. They're the ones I almost mentioned in my previous message. I actually haven't tried an EuroPiccola myself, but Ken has been using one for quite a while.

Posted June 25, 2011 link

I love the more hands-on stuff. That's why I would rather buy a lever first than a high-end machine.

Enkerli Said:

Now, 15 bar sounds unlikely and even undesirable, but maybe the pump is capable of delivering the standard 9 bar?

Posted June 25, 2011 link

Boy, I sure hope so.

Enkerli Said:

Oh, and by the way… I'm not dogmatic in my stance against cheap espresso machines.

Posted June 25, 2011 link

Me neither. I see this more as free training.

 
Do what you love to do and give it your very best
back to top
 View Profile Link to this post
johnny4lsu
Senior Member
johnny4lsu
Joined: 27 May 2011
Posts: 78
Location: The Sticks
Expertise: Just starting

Espresso: NS Oscar
Grinder: Mazzer Super Jolly
Drip: Clever, Chemex
Roaster: Behmor 1600
Posted Sun Jun 26, 2011, 9:50pm
Subject: Re: Confessions of a Brikka Lover
 

Need some advice:

I've been thinking about buying an espresso machine for at home. (Silvia with PID) I'm on a budget and it appears to be the most bang for the buck. I noticed that u mentioned earlier that they aren't That great. Thoughts?

I currently own a 2c Brikka, 6 and 3c moka pot, and a hario mini slim.

 
1 Corinthians 10:31 Therefore, whether you eat or drink, or whatever you do, do everything for the glory of God.
back to top
 View Profile Link to this post
Enkerli
Senior Member
Enkerli
Joined: 1 Aug 2004
Posts: 711
Location: Montreal, Qc
Expertise: I love coffee

Espresso: (At cafés, not at home)
Grinder: Hario hand grinders
Vac Pot: (Moka Pot) Bialetti Brikka
Drip: Steep and release pour-over
Roaster: iRoast-2
Posted Sun Jun 26, 2011, 10:26pm
Subject: Re: Confessions of a Brikka Lover
 

I don't own a Silvia but I've had excellent shots from at least two of them. Haven't heard anything bad about them.
Mark probably meant that he'd prefer an EuroPiccola for the manual aspect. Makes sense. But it's nothing bad about the Silvia itself. Right, Mark?

 
Alex
http://enkerli.com/
back to top
 View Profile Visit website Contact via AOL Instant Messenger Contact via ICQ Link to this post
Enkerli
Senior Member
Enkerli
Joined: 1 Aug 2004
Posts: 711
Location: Montreal, Qc
Expertise: I love coffee

Espresso: (At cafés, not at home)
Grinder: Hario hand grinders
Vac Pot: (Moka Pot) Bialetti Brikka
Drip: Steep and release pour-over
Roaster: iRoast-2
Posted Sun Jun 26, 2011, 10:31pm
Subject: Re: Confessions of a Brikka Lover
 

RaptorHornet Said:

I love the more hands-on stuff. That's why I would rather buy a lever first than a high-end machine.

Posted June 26, 2011 link

Have you tried the Presso? Again, a friend swears by it. In fact, he lent me one. But it seems to be leaking. Sounds like there are problems like these with many of them but, when they work, they can produce something really good. Especially if you have a good kettle. (I have a Pino kettle, that I use for “steep-and-release pour-over drip” as well as for gaiwan tea…)
Not sure how easy it is to get the Presso. But it's unexpensive and very hands-on. Somewhat more portable than an electric machine, too.

As for the Maison machine, do keep us posted. Are you able to pull 20s shots?

 
Alex
http://enkerli.com/
back to top
 View Profile Visit website Contact via AOL Instant Messenger Contact via ICQ Link to this post
showing page 148 of 160 first page | last page previous page | next page
view previous topic | view next topic | view all topics
Discussions > Coffee > Machines > Confessions of a...  
New Topics updated topics   New Posts new posts   Unanswered Posts new unanswered     Search Discussion Board search   Discussion Board FAQ faq   Signup sign up  
Not Logged in: Log In to Postlog in
Discussions Quick Jump:
Symbols: New Posts= New Posts since your last visit      No New Posts= No New Posts since last visit     Go to most recent post= Newest post
Forum Rules:
No profanity, illegal acts or personal attacks will be tolerated in these discussion boards.
No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum.
No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum.
Who Can Read The Forum? Anyone can read posts in these discussion boards.
Who Can Post New Topics? Any registered CoffeeGeek member can post new topics.
Who Can Post Replies? Any registered CoffeeGeek member can post replies.
Can Photos be posted? Anyone can post photos in their new topics or replies.
Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts.
Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.
Barista Tools
Large selection of tampers, pitchers, milk frothers and much more!
www.espressozone.com
Home | Opinions | Consumer Reviews | Guides & How Tos | CoffeeGeek Reviews | Resources | Forums | Contact Us
CoffeeGeek.com, CoffeeGeek, and Coffee Geek, along with all associated content & images are copyright ©2000-2013 by Mark Prince, all rights reserved, unless otherwise indicated. Content, code, and images may not be reused without permission. Usage of this website signifies agreement with our Terms and Conditions. (0.418697118759)
Privacy Policy | Copyright Info | Terms and Conditions | CoffeeGeek Advertisers | RSS | Find us on Google+