DScottK Senior Member Joined: 5 Dec 2008 Posts: 19 Location: Towson, MD Expertise: I love coffee
Posted Tue Jul 17, 2012, 5:00pm Subject: Re: DIY Aeropress Cold Drip Brewer for Under $30 - How To
My first attempt has been ongoing for a little over four hours with maybe an ounce or two of water left. While I was steady at 40 drops per minute at the start, it has slowed to 2-4 drops per minute now. What on earth do you do with that last bit of water? At that rate, it could go on for much longer. I also found it to taste a little under-extracted, so I'll tweak my grind just a bit. I've attached an image of my grind setting with my Capresso.
primacoffee Senior Member Joined: 19 May 2010 Posts: 37 Location: Louisville, KY Expertise: I live coffee
Posted Wed Jul 18, 2012, 5:38am Subject: Re: DIY Aeropress Cold Drip Brewer for Under $30 - How To
It's true, the rate tends to slow down a lot at the end. Apparently the pressure applied by the total water volume affects the drip quite a bit. A couple of solutions come to mind:
Widen the hole in the lid as the drip rate slows.
Prepare two punctured lids, one with a smaller hole that drips at the desired rate with a full volume of water and another with a larger hole that drips at the desired rate with a low volume of water.
Throughout the process, continually refill the water reservoir in order to maintain a consistent drip rate. Instead of ending the brew when the bottle is empty, end when the desired coffee volume has been produced.
It's also been suggested that we experiment with another type of lid (see picture) that has an easily adjustable opening. If this works, it would be simple to adjust the rate throughout the process as needed.
Let us know if these tips lead to improved results!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.