I don't have the exact measurements, but it was definitely rubber shrinkage for cold blowby. IIRC, warm rubber plunger in room temperature cylinder - tight. Room temperature plunger in room temperature cylinder, average. Refrigerated rubber plunger is basically unusable in a room temperature or slightly warm cylinder - and borderline with a cold cylinder.
The copolyester seems to have a different coefficient of expansion than the rubber plunger (I know this may be a "duh" moment for some), but my brother has an old polycarbonate AP that is still going strong and it's a couple years older and doesn't seem to be affected by variations in temperature as much.
I looked up thermal expansion coefficients: polycarbonate and copolyester are similar, with polycarbonate actually a little higher. Not too surprisingly the rubber plunger (thermoplastic elastomer) is about twice the value.
It's hard to say why your brother's AP is still doing well as there could be a number of possible reasons.
Instead of heavy Pyrex, how about an AP based on a stainless steel vacuum bottle? Make it taller and add a valve closure at the bottom and... it would be too expensive!
By the way, I had originally estimated my AP use based on time (16 months X 2 cups/day), but when I looked at the number of filter papers I've gone through (350/pkg) it appears the number of cups is closer to 750. I started having problems about 100 cups ago and the crazing appeared evan longer ago. Plastic.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.