Sisyphus1978 Senior Member Joined: 26 Nov 2012 Posts: 6 Location: Abingdon Expertise: I love coffee
Grinder: Baratza Virtuoso Drip: Brazen Roaster: Nesco/West Bend
Posted Mon Nov 26, 2012, 5:20pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Howdy! New member here, but not a newbie to coffee by any means. I've had the Brazen for a few weeks now and recently started roasting my own beans via the Nesco. Thus far, it would seem my two biggest challenges have been getting the brew temperature right and the pre-soak accurate enough, though I *might* be starting to turn the corner with the pre-soaking. Far too often my brews have turned out kind of bitter. I've adjusted the grind size (using Baratza Virtuoso, setting 20-22) and pre-soak to recommendations I've read throughout this thread, and I recently switched to the gold filter to see if that'd yield different results (changed grind setting to 25). So far it's been okay, and the bitterness seems to have subsided; however, some thinness of taste has also crept in there from time to time. I read a few pages back how darker roasts prefer lower temperatures while lighter ones seem to favor higher temps, but knowing where to draw the line has proven to be tricky.
Typically I favor Full City roasts, but I also know that bean origins can also play a role. With that stated, can anyone provide any good rules of thumb to help better gauge what temperature I should use? I always knew temperature was important in flavor extraction, but I never thought fractional variations could affect taste so much. I've got a rather awesome smelling batch of El Salvador Majahual Tablon La Montana from Sweet Maria's sitting downstairs (full city roasted it Saturday or Sunday), and I'd love to get it right tomorrow morning. Lord knows a good cup of coffee can really help get the day started on the right foot, and with the way work tends to fare I need all the help I can get :).
The_Coffee_Guy Senior Member Joined: 5 Jan 2009 Posts: 107 Location: Toronto Expertise: I live coffee
Grinder: Baratza Encore Drip: Behmor BraZen Brew System,...
Posted Mon Nov 26, 2012, 8:02pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Welcome! My recommendation for temperature is to start at 204F and inch it up to 205 or down towards 200 to see how it does for flavour. Personally I use 204 and the gold filter as the gold filter allows the 'coffee oils' to enter the recipe for a great cup, adding flavour. In addition, I find the gold filter overall provides a bolder cup than paper filters. Its really a guessing game to taylor the taste to your liking but it is a fun 'addiction' if you will that never goes away once you use a BraZen :) I am sure you will get answers from those in the group that are pro and may know more about the chemistry behind the great cup of coffee. Happy Brewing.
Posted Mon Nov 26, 2012, 9:09pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Sisyphus1978 Said:
Howdy! New member here, but not a newbie to coffee by any means. I've had the Brazen for a few weeks now and recently started roasting my own beans via the Nesco. Thus far, it would seem my two biggest challenges have been getting the brew temperature right and the pre-soak accurate enough, though I *might* be starting to turn the corner with the pre-soaking. Far too often my brews have turned out kind of bitter. I've adjusted the grind size (using Baratza Virtuoso, setting 20-22) and pre-soak to recommendations I've read throughout this thread, and I recently switched to the gold filter to see if that'd yield different results (changed grind setting to 25). So far it's been okay, and the bitterness seems to have subsided; however, some thinness of taste has also crept in there from time to time. I read a few pages back how darker roasts prefer lower temperatures while lighter ones seem to favor higher temps, but knowing where to draw the line has proven to be tricky.
Typically I favor Full City roasts, but I also know that bean origins can also play a role. With that stated, can anyone provide any good rules of thumb to help better gauge what temperature I should use? I always knew temperature was important in flavor extraction, but I never thought fractional variations could affect taste so much. I've got a rather awesome smelling batch of El Salvador Majahual Tablon La Montana from Sweet Maria's sitting downstairs (full city roasted it Saturday or Sunday), and I'd love to get it right tomorrow morning. Lord knows a good cup of coffee can really help get the day started on the right foot, and with the way work tends to fare I need all the help I can get :).
Hi Sisyphus, I am also new to the Brazen but not to coffee brewing. My first piece of advice is don't give up on the Brazen. Although I've also had several pots that have been either weak, thin, too strong, and/or bitter, I've also had some truly extraordinary results. But with so many variables to play with it really isn't surprising that the range of results can be so wide. The key, as with all brewing methods, it to find your sweet spot. I can give you my current recipe, but since beans, roast, personal taste, grinders, etc. can all vary there's no one formula that will work best for everyone. What I'm convinced of is the Brazen is extremely capable of producing a really exceptional brew, because I've tasted it.
During the course of experimenting I've varied everything, including 26 to 32 oz water, 30 to 35 g coffee, 190 to 205 temp, 45 sec to 2:30 pre-soak, grind settings from coarse drip to very fine, paper and gold filter.
My experiments will continue, but here's what's currently working for me.
26 oz water 33 g coffee, ground fine, closer to espresso than drip (9 steps from 0 point on my Rocky) 45 sec pre-soak (10 day old beans) 201 deg paper filter
The results can be all over the map, but what I'm so happy about is just how amazingly complex, rich, good and repeatable it can be when you get it set up right.
Posted Mon Nov 26, 2012, 11:04pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
cafedj Said:
My experiments will continue, but here's what's currently working for me.
26 oz water 33 g coffee, ground fine, closer to espresso than drip (9 steps from 0 point on my Rocky) 45 sec pre-soak (10 day old beans) 201 deg paper filter
IMAWriter Senior Member Joined: 4 Jul 2002 Posts: 5,477 Location: Brentwood, TN Expertise: I live coffee
Espresso: Nothing at the moment Grinder: Vario-W,Preciso-Esatto/KyM... Vac Pot: Adcraft SS, Yama 8 cup Drip: Brazen.Chemex, Hario, Clever... Roaster: Behmor 1600, CO/UFO combo
Posted Mon Nov 26, 2012, 11:32pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Jeff, Welcome to CG. I am also a home roaster (11 years now!). However, as you are fairly new to home roasting (?) I might suggest you get a pound or more of fresh roasted coffee from a commercial roaster you've read about here, perhaps a nice El Salvador similar to yours, maybe a fruity Ethiopian. As you seem to like full body, go with 60 grams of coffee, water to the 1.25 mark. I cheat and go a 1/4" higher! As #'s are relative, I'd grind to the degree the grind is like salt when using the paper filter, or just finer than Kosher salt if using the basket (meaning, a coarser grind for the permanent basket). THIS is every bit as important as regards the BraZen as is the other elements such as temperature adjustment, pre-soak time, etc.
I would go with 200f (92.3 c) for the El Salvador, 201-202 for the Ethiopian.
By using artisan roasted beans, you take yourself out of the equation. By comparing the artisan beans to your El Salvador roast, you can see where you stand. Perhaps even bite into some beans from the artisan roast, and yours. This is not meant in ANY way to demean your roasting skills! Just trying to give you a standard to shoot for. A brewer as advanced as the BraZen has the unavoidable trait of making great coffee taste great, or less than great coffee taste....less than great.
Sisyphus1978 Senior Member Joined: 26 Nov 2012 Posts: 6 Location: Abingdon Expertise: I love coffee
Grinder: Baratza Virtuoso Drip: Brazen Roaster: Nesco/West Bend
Posted Tue Nov 27, 2012, 6:33am Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Thanks for all of the great information! I decided to run a test and ended up roasting a house blend from CoffeeBeanDirect (roasted it kind of dark, but not burned) and a Costa Rica Finca Salaca from SM's in a West Bend Poppery II, so I can see if the longer roasting time of the Nesco is somehow playing a role in the tastes I'm experiencing. We'll see how that fares tomorrow AM. For now, the coffee to which I referred previously came out okay this morning - 26 on Baratza, 201 degrees, 1:30 pre-soak (still less than 3 days old), and gold filter. The caramel-like flavors I was supposed to experience are coming through, but it's a touch sour (I think) at the end, so I might need to bump up the temp a degree or two the next time, assuming the Nesco isn't to blame.
Depends on the bean and the grind for me. I prefer a finer grind than most people use. I don't go with charts, I use my taste to determine the ratio. The bean I tried today, a relatively lightly roasted Costa Rica does need a larger dose. I'll adjust until it's too strong then back off.
No, no meter. Don't really care since it's all about the taste. I don't think I like under extracted or weak coffee at all. My strong preference is for deep body, as in french press, vacuum pot and Krups Moka Brew. But I do have an aversion to over strong or bitter flavors. I'm working on maximizing the depth and body with the Brazen. Comes down to finding the right ratio, grind, temp, and pre-soak for the steep time. The Ethiopia I had yesterday with that posted recipe was exceptionally good, layers of flavors, not max body of the Moka Brew but rich and more of the fruit notes. I was planning to up the dose some but didn't have enough left for today. Costa Rica I had this morning needs more coffee so I'll push it.
Posted Tue Nov 27, 2012, 7:02pm Subject: Re: Now we know what GORT is (Behmor BraZen Brewer)
Then why did you offer the recipe to the new owner's question? It sounds like your results are still very much a work in progress - why not just say that then?
I chew coffee beans with my teeth while gargling with 195 F water to enjoy coffee. What is this "coffee brewing" device you speak of?
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.
= No New Posts since last visit 