keilang Senior Member Joined: 11 Dec 2007 Posts: 1 Location: ca Expertise: I like coffee
Posted Sat Feb 16, 2013, 5:59pm Subject: technivorm and virtuoso grinder
Help... Made the investment but can't seem to get a good tasting cup of coffee.. I have been using fresh roasted beans and weighed my coffee to 60gms to a full pot which is 1.25 ltr. I have ground the beans on setting 18 and the coffee is horrible and very bitter....I let it bloom for about 1 minute then open to full and let it continue to brew....any suggestions would really help
redkiosk Senior Member Joined: 13 May 2012 Posts: 167 Location: Chicago Metro Area Expertise: I love coffee
Espresso: Illy Francis-Francis X1 Grinder: Baratza Preciso w/ Esatto... Vac Pot: Someday, very intriguing Drip: Bunn Trifecta MB Roaster: A sure path to divorce!
Posted Sat Feb 16, 2013, 6:38pm Subject: Re: technivorm and virtuoso grinder
Seems to be over-extracted with 60 grams to 1.25 L. Try starting with 60 grams and 1 L and see how that is. Then play around with the grind a bit. I'm sure there are a few threads dealing with the Technivorn if you do a search. Hope this helps and take care!
The pathologically precise are annoying, but right!
oldgearhead Senior Member Joined: 25 Jan 2010 Posts: 377 Location: Go Colts! Expertise: I like coffee
Grinder: Virtuoso by Baratza Drip: Chemex,Dilongi DCM900 Roaster: 1/2K Fluid-bed
Posted Sun Feb 17, 2013, 10:21am Subject: Re: technivorm and virtuoso grinder
1) Put 1.0 liter of filtered, soft, water plus .25 liter of hard (20 grain) tap-water in the DeLongi DCM900. 2) 72 grams of full-city, Peru SHG, fluid-bed roasted, and rested three days. 3) Grind in Virtuoso at #18 and place in Melitta #4 filter. 4) Bloom for 1 minute with filtered water, 40 seconds off-the-boil. 5) Flip the switch and, behold, 204F water flows up and into the filter and wonderful coffee drips down.
I've found that 'bloom' water temperature has some bearing on bitterness, but the water used has a great effect.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.