I've had 3 Cory rods for awhile using them in my 8 cup Yama vac pot. 2 of them say Cory Filter Rod, Pat. Des. 114097, U.S. PAT. 1927287 and 1 says New Cory Rod, Pat. Des. 1931076, U.S. PAT. 1935587. They work well, but sometimes they will stall a bit and I have to set my grinder on 2 or 2 1/2 setting to get a 1 1/2 minute kick down. My grinder settings go from 1 (French press) to 8 (Espresso) with 5 being for drip.
I recently picked up a Westinghouse 8 cup vac pot that the seal is not brittle or cracked and is pliable, but the fit is too loose for it to work. It also had a Cory rod in it. That rod works great in my Yama. At number 3 grind setting the kick down is 45 seconds, at the 4 setting it's 1 1/2 minutes, and at the 3 1/2 setting it's one minute five seconds kick down.
That Cory rod is unlike any that I've seen. It is marked Cory Filter Rod and has Pat. Des. 114097 but no U.S. PAT. number. The "handle" that sticks up in the upper bowl doesn't have the ribs and dots on it like the other 3 do, it's just smooth except for the letters and numbers. The "head" at the top is round and not square like the others.
I looked up the design number at the U.S. Patent Office and it shows the square headed drawings from the 1939 patent.
What do I have here?
I've attached a couple of photos, the New Cory Rod on the left, the other two shorter stemmed Cory Filter Rods in the middle, and the one I just got with the Westinghouse on the right.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.