Posted Wed Sep 25, 2013, 10:20am Subject: Beans not catching in flat burr grinder in cool conditions
So the last few nights have gotten pretty cold here in ONT.. Our house is rather old and drafty. Last night the temp dropped to around 60'F maybe lower in the house. When it gets this cold I notice my grinder has a hard time catching beans when I attempt to small dose. Has anyone experienced this problem? I usually have to either kick on the heat and wait 5-10 min or grinder course and bring the burrs back down. Maybe there may be some coffee left in the shout up in the corners from the last grind. Could this stop grinding coffee flow?
Grinder: Macap MX Burrs: flat 65mm almost new Damage? None Roast: El Salvador FC Cleaning: Burrs are cleaned whenever I use a different roast of coffee. at least once per month.
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 7,854 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Wed Sep 25, 2013, 10:58am Subject: Re: Beans not catching in flat burr grinder in cool conditions
Wow, that is weard.
Metal does move with temp but burrs are so small that even with very large temp swings, you will not see more than a thousandth of an inch movement in them then it takes longer than your time frame to warm back up as they are inside the machine and the heat needs to get to them, say half an hour or so. But then, when single dosing the burrs will be open to the air.... IDK.
I know I have had grinders that did not want to single dose well, they would be OK with a hopper of beans but they had a hard time when the burrs were empty to start.
The beans are more exposed to temp than the burrs are I wonder if it has anything to do with them. As there are really only three variables, the temp, the grinder and the beans, next time try warming up only the beans. If there is still a feed problem then suspect the grinder. If they feed properly then it seems to be something with the beans. When the temp changes and they both change together, you don't know which of the two is having an issue.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Posted Sun Sep 29, 2013, 8:17am Subject: Re: Beans not catching in flat burr grinder in cool conditions
So after cleaning the burrs I still have the same problem. Could be a variety of things but dirty burrs aren't one of them. I have found so far that if I don't single dose it seems to work fine. I think the climate (dry cool air) in my house combined with ehatever is left behind on the burrs are causing the issue. I will just dose by grind not bean.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.