Posted Sun Aug 5, 2012, 8:30pm Subject: Re: Auber PID on a new Gaggia Classic
Thanks Fred. No, didn't find your email. Really don't know where to look. Talk about being a newbie lost in outa space! LOL I'm new to this site also. Only joined a few days ago. The email you sent me previously had a typo in it when I joine CG. I fixed it after you told me it was bounced back to you. Pete
Posted Sun Aug 5, 2012, 8:42pm Subject: Re: Auber PID on a new Gaggia Classic
No problem. You will enjoy the PID. There must be a newer Gaggia Classic run with different color wiring than on the Auber stuff. They reference since "2006," but the new ones seem different. Just tried your email again.
Posted Mon Aug 6, 2012, 8:04am Subject: Re: Auber PID on a new Gaggia Classic
I wired my classic with an Auber PID last week. I bought the machine NIB on eBay, so I thought it was a post 2006 model, but it wasn't. Regardless, the colors of my wires were different than the pre-2006 pictures shown in the install guide - though my variations were in the T-stat wiring, not the power leads. Suyi at Auber says wire colors vary on these machines. I'm sure he'll help you straighten it out, as he did for me as well. I'm going to guess you want to tap #9, same position/different colors as in the pics. But you should talk to him, obviously.
I'm happy with the unit. My Silvia wand is en route and I'm close to completing my upgrades.
Posted Mon Aug 6, 2012, 9:34am Subject: Re: Auber PID on a new Gaggia Classic
Thanks - yes I've spent some time with that chart!
I guess the obvious point is for Classic users to design their shots for 1.5-1.75 oz. I asked that question on HB as I'm skeptical that the drop is that much. I've just started playing around with getting measurements from the styrofoam cup method, which of course is quite non-scientific. So, I was curious what Andy's real-world numbers looked like with his setup, though I know his machine isn't PIDed.
Posted Mon Aug 6, 2012, 9:56am Subject: Re: Auber PID on a new Gaggia Classic
Of course you will need a thermofilter to watch the shot, intrashot. I think that the study data is probably quite real-world except most of us use a few seconds of steam switch prior to the shot which will blunt the drop. The 3 way will not allow steam switch intrashot unless you rewire. Rather that change this thread on wiring a PID, you may want to read here.
Posted Tue Aug 7, 2012, 9:38am Subject: Re: Auber PID on a new Gaggia Classic
No, not yet. Been bogged down at work. Not good when work gets in the way of my hobby! LOL I did talk to Suyi at Auber tech support yesterday though. Got some good info from them and will try to get some time to start the install. They were very helpful and cleared up a few things for me. Thanks for asking....
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.