Posted Mon Oct 29, 2012, 9:22pm Subject: Steam LEVER upgrade for Oscar
The meat of my thoughts are down there on post 4
Hey fellow CGs. So, i'm getting sick of having to turn the knob so many times to get the steam to open and close. It really makes it a pain to stop the steam exactly when i need it to stop.
I'm looking at parts from other NS machines for the levers and differences in valves etc.
Ideally, i'd like to be able to use the existing steam valve and fit a lever and fork from another machine to it. If that isnt possible, possibly swapping the entire valve body with one that fits Oscar.
At this point, i think i need to find out the exact thread size of the oscar valve body and find out what other bodies are using. Also look at possible parts from other machines. From parts diagrams, it looks like i'll need the lever, a fork, steam valve screw, and possibly other misc parts. I also know that likely the parts wont fit properly onto the plastic front cover of oscar and that will probably need to be modified to allow it to fit.
Posted Mon Oct 29, 2012, 9:34pm Subject: Re: Thoughts of a steam LEVER upgrade for Oscar
hmm looks like the attachment from the valve to the machine on both aurelia and oscar are the same(part# 07300110 steam tap spring holder). This seems like a positive thing as this probably means that a direct swap is likely possible.
Posted Mon Oct 29, 2012, 10:14pm Subject: Re: Thoughts of a steam LEVER upgrade for Oscar
as far as hacking into the front cover...im thinking it'll just need a couple clean cuts vertically so that the lever has room to move. this is just a guess tho. If it's as easy as i'm thinking, reattaching the knob should be easy and the cut should not be noticeable with the knob back on if you choose to go back.
Posted Mon Oct 29, 2012, 11:44pm Subject: Re: Thoughts of a steam LEVER upgrade for Oscar
order for parts placed through espressoparts. came out to 84.06 because i added a few extra parts so that i dont have to take apart my current valve to reuse the parts from it. specifically they were " Nuova Simonelli Appia/Aurelia/Mac/Premier/Program Steam Valve Rebuild Kit (SKIT3)"($17.50) which includes the two silicone gaskets(would have been $2.38) from the original list along with the spring, washer and piston that i would have had to use from my original valve. Also i ordered "Nuova Simonelli Steam Valve to Boiler Fitting (S_133)"($4.50) which is the coupling fitting from the valve to the machine. This also would have had to be removed from the old valve.
here's the full order along with the espressoparts part numbers:
Name Qty Unit Price Total Price 'Aurelia/Mac 2000/Program VIP/' Steam/water Piston Stem (S_254) 1 13.53 13.53 Nuova Simonelli 'Aurelia/Appia' Steam Valve Lever (S_442) 1 18.50 18.50 Nuova Simonelli 'Aurelia/Mac 2000' Steam Valve Body (S_257) 1 16.50 16.50 Nuova Simonelli Appia/Aurelia/Mac/Premier/Program Steam Valve Rebuild Kit (SKIT3) 1 17.50 17.50 Nuova Simonelli New Style Steam Valve Fork (S_66A) 1 8.20 8.20 Nuova Simonelli Steam Valve Lever Pin (S_86) 1 1.00 1.00 Nuova Simonelli Steam Valve Lever Pin C-clip (S_85) 2 1.54 3.08 Nuova Simonelli Steam Valve to Boiler Fitting (S_133) 1 4.50 4.50 Solenoid/Faema Sight Glass Face Screw (F_258) 1 1.25 1.25
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.