CalvinAtNYC Senior Member Joined: 28 Oct 2011 Posts: 3 Location: NYC Expertise: Just starting
Espresso: Rancilio Silvia Grinder: Mazzer Mini E and Super...
Posted Sat Dec 10, 2011, 1:43pm Subject: I did it!!! - Delonghi EC155 mod with Rancilio Silvia v.1/2 steam wand
Forgiving my poor English and this is my first post ever on Coffeegeek.
This is for my office espresso machine and I’ve been use Gaggia Latte art wand on it but still preferred the stainless wand. ( As you can see I already mod my Giggia Classic at home with Rancilio Silvia steam wand and I love it!! )
Since I never find any EC155 wand mod other than H.K. made nozzle/acorn nut fit. ( Too bad I never be able get it in US. ) So here I am to share my mod result for Delonghi EC155 with Rancilio Silvia v.1/2 steam wand for better milk frothing.
Basically the mod is quit straight forward. I think the most difficult part is get the Rancilio wand goes back into the pipe joint. ( a little bit hand soap will make this much easier. )
After the mod I realized the new wand swing by itself so it will not stay at the position I want it to be.
The fix? I just use one drop of crazy glue to make sure the new wand and joint stick together.
So far I like the result and will see if this mod last.
Posted Tue May 29, 2012, 12:26pm Subject: Re: I did it!!! - Delonghi EC155 mod with Rancilio Silvia v.1/2 steam wand
Correct the Sylvia V3 uses a commercial ball joint connection steam wand.
With the V1/2 wand you just need to take the casing off the top and bottom of the EC155. Undo the 4 hex screws holding in the grouphead to get to the steam wand. Pop it out and remove the black plastic piece holding the OEM Delonghi wand in place. Take the tip and burn proof rubber off the V1/2 wand to put on the black plastic piece and re assemble the machine. As for the hose remove the clamps to detach and re attach the steam wands. They are both 6mm. Also go to a local hardware store and buy 5/18" hose clamps. for the steam tube.
Posted Mon Nov 26, 2012, 1:13pm Subject: Re: I did it!!! - Delonghi EC155 mod with Rancilio Silvia v.1/2 steam wand
I have had this mod for 1 year now and it's still holding strong. I have even done 2 teardowns. If anyone is experiencing a loose steam wand swiveling just line the plastic and the wand inside the plastic piece with Teflon tape holding the wand in place.
dannyfrenton Senior Member Joined: 4 Dec 2012 Posts: 1 Location: Durham, NC Expertise: I love coffee
Posted Tue Dec 4, 2012, 3:21pm Subject: Re: I did it!!! - Delonghi EC155 mod with Rancilio Silvia v.1/2 steam wand
Did you need to purchase two additional o-rings other than the steam valve? I am thinking of doing this mod for my delonghi ec 155 as well and I would like to know all the parts (orings, telfon tape etc) which are needed. Appreciate your help.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.