RNAV Senior Member Joined: 19 Aug 2012 Posts: 24 Location: Fayette'nam, NC Expertise: I like coffee
Espresso: Expobar Office Lever
Posted Mon Dec 17, 2012, 5:49pm Subject: Add brew pressure gauge to older Expobar Office Lever?
I've got an '08 Expobar Office Lever which does not have a brew pressure gauge (only a boiler pressure gauge). I noticed the newer Levers have a brew pressure gauge. Is it possible to retrofit this onto my older Lever?
SStones Senior Member Joined: 24 Nov 2012 Posts: 475 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Mon Dec 17, 2012, 6:25pm Subject: Re: Add brew pressure gauge to older Expobar Office Lever?
When I saw the word "Lever" I pictured a very different machine. Apparently I don't know what a lever machine is, if this Expobar Office Lever is what coffeegeek is referring to as a "lever machine".. But anyway, yes. That is what I would call an E61 type vertical boiler HE machine. The choice for adding a brew-pressure gauge comes down to what holes you want to drill, and where. You could drill a small hole for an indicator light to show when the element is on and replace the boiler pressure gauge with the brew pressure gauge. You could go without an indicator light and do the same thing, with no indication of boiler pressure. You could drill a second big hole to mount a second gauge in and go with two separate gauges. Or, you could replace the existing boiler gauge with a dual-gauge, this is particularly good if you find a gauge to fit the existing hole. When teeing in the line between your new gauge and the brew-circuit, the closer you are to the Heat Exchanger inlet and the further from the pump, the better. The vibration pump will make the reading unstable closer to the pump. It should be possible using fittings and flexible copper tubing common to the expobar machines born with the second gauge.
Alternatively, it is possible that a machine with the two gauges is available used for barely more than you can sell your single-gauge one for. Might be better than customizing a machine. Many people think customizations ruin a machine, even if they work.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.