samsom_tw Senior Member Joined: 29 Jan 2013 Posts: 32 Expertise: Just starting
Posted Wed Mar 13, 2013, 6:50pm Subject: Gicar flow meter acting up
I have a Verton Gicar flow meter. I have to jiggle it to get the machine going. I'm not sure if the connections are bad or if the whole thing is going out. It has a black cable running to a volumetric control panel. I wonder if replacing the cable is the easiest thing to try first? Is the cable proprietary to Gicar or can I get the parts at a big box store?
billc Senior Member Joined: 15 Jan 2009 Posts: 99 Location: Seattle, Washington Expertise: Professional
Espresso: CC1 - GS - GS3 - GB5 Grinder: Baratza - Mazzer-Marzocco Drip: My own Creation
Posted Mon Mar 18, 2013, 6:42am Subject: Re: Gicar flow meter acting up
The cable is nor proprietary however I would check a couple of things before replacing. See if you can remove the top of the flow meter to check the turbine inside. When open check the turbine for smooth movement and also check for rust on the magnet.
If everything loos OK, then i would check the connections on both ends of the cable. If all looks OK, then the Hall Effect sensor may be damaged inside the flow meter. I can't remember if you can actually remove the sensor. Sometimes you can remove the connector on top of the flow meter and the sensor is directly under the connector (Plastic, low pressure versions only).
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.