Plester Senior Member Joined: 21 Mar 2002 Posts: 14 Location: California Expertise: I love coffee
Espresso: Salvatore Famosa Grinder: Gaggia MDF
Posted Wed Aug 7, 2013, 7:53am Subject: Rocky doserless spout mod
Modded the spout on a Rocky doserless. I used a piece of scrap hardwood for the mount. Drilled with a 1" hole saw, dremeled the back side to a rectangle to fit the rubber bushing, sanded it and added 2 coats of flat black, rough sanded the clamp (halex 3/4 in. 90-degree connector from home depot) and polished it with some high grit paper. The thumb screws and springs were from my junk drawer. It would be cool to machine one out of black delrin or something similar.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.