gammeltoft Senior Member Joined: 5 Nov 2004 Posts: 239 Location: Copenhagen, Denmark Expertise: I love coffee
Espresso: Dalla Corte Mini Grinder: Mazzer Mini E Roaster: Alpenröst
Posted Sun May 22, 2005, 2:04pm Subject: Re: riviera rebuild -- advice (also: should i polish?)
I have a very similar machine, also with the spring grouphead. Mine doesn't have the eagle or direct plumbing, both otherwise looks very similar. The grouphead is very small, the basket is 45 mm. I haven't been able to get good shots with it, always seemed to overheat or burn the coffee. Advice from those experienced most appreciated. I think it needs new piston gaskets as well, but can't get any at reasonable prices in Europe - again, advice would be most appreciated.
What is the tape mod?
(Click for larger image)
Coffee leads men to trifle away their time, scald their chops, and spend their money, all for a little base, black, thick, nasty, bitter, stinking nauseous puddle water. ~The Women's Petition Against Coffee, 1674
Posted Wed Sep 28, 2005, 6:55am Subject: Re: riviera rebuild -- advice (also: should i polish?)
I just got a Rivera. Is the top end of the sight glass supposed to be loose? Water flows out here if I turn the machine upside down. I assume it should be sealed here, maybe an o ring that long since diasappeared? How do you install a new sightglass?
Posted Thu Sep 29, 2005, 6:59pm Subject: Re: riviera rebuild -- advice (also: should i polish?)
Ya, the sight glass shouldn't be loose. You can replace the gasket by taking the pressure gauge off the top. The sight glass slides out the top then. The glass itself should still be fine. My guess is a lot of other gaskets are toast too. Cara is the place to get replacements.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.