CoffeeGeek - Espresso: Espresso Machines, PID Isomac Single Boiler Machine

Espresso: Espresso Machines
PID Isomac Single Boiler Machine

Rocket R58 Double Boiler

Rocket Espresso R58 Double Boiler - Everything you need for the perfect shot!
www.seattlecoffeegear.com

Not Logged in:

updated topics	new posts	new unanswered
search	faq	sign up

Discussions > Espresso > Machines > PID Isomac...

view previous topic | view next topic | view all topics

showing page 1 of 13

last page

Author

Messages

mguterman
Senior Member

Joined: 10 Dec 2002
Posts: 24
Location: West Haven, CT
Expertise: I live coffee

Espresso: Isomac Amica
Grinder: Mazzer Mini
Vac Pot: Bodum
Drip: Melita single cone
Roaster: Hottop

Posted Fri Mar 19, 2004, 11:55am Subject: PID Isomac Single Boiler Machine

I am wondering whether anyone has done a PID conversion on an Isomac Amica or Zaffiro. I have an Amica, and it seems that it would be terrific to be able to dial in the temperature. Michael

korngold
Senior Member

Joined: 21 Jul 2003
Posts: 636
Location: Des Moines, IA
Expertise: I love coffee

Espresso: Rancilio Audrey
Grinder: Rancilio Rocky
Drip: Melitta Clarity
Roaster: WE Popcorn Pumper

Posted Fri Mar 19, 2004, 12:42pm Subject: Re: PID Isomac Single Boiler Machine

Michael, It should have the same positive effect that it does on Silvia, and you'll likely need the same materials. Do a google search on "Silvia PID" and you get a bunch of hits. Find "Pepe's Silvia Page" and that should give you a pretty decent parts list. Good luck!

jim_schulman
Senior Member

Joined: 19 Dec 2001
Posts: 3,772
Location: Chicago
Expertise: I live coffee

Posted Fri Mar 19, 2004, 1:10pm Subject: Re: PID Isomac Single Boiler Machine

In one respect, it should be easier and better than the Silvia. The stock thermostat is a bulb into a well in the boiler as opposed to the Silvia's stick on. Using the well to hold the TC (filled with thermal caulk or heat sink compound) will significantly improve the controller's response speed over a Silvia PID. On the other hand, the bulb stat is way better already, since it too responds quickly and since it's adjustable. So the control improvement may not be dramatic, although the PID will be easier to set than the stock stat.

Jim Schulman www.coffeecuppers.com

mguterman
Senior Member

Posted Fri Mar 19, 2004, 3:37pm Subject: Re: PID Isomac Single Boiler Machine

Thanks. What I am looking for is the ability to easily change temperature between blends. I am very happy with the machine as it is. I would have happily paid Isomac the extra money for a setup that let me dial a specific temperature. I don't mind the experimenting that would go along with matching that temperature to what I wanted at the moment. Michael

dcbrown
Senior Member

Joined: 13 Jan 2004
Posts: 167
Location: Chicago
Expertise: I love coffee

Espresso: PID Zaffiro
Grinder: Innova i1d

Posted Fri Mar 19, 2004, 5:11pm Subject: Re: PID Isomac Single Boiler Machine

I think PID would be a good option for those of us whose machines have thermostats with excessive temperature differentials. I'm finding out that accurate and adjustable isn't enough. Maybe I should hold my tongue until I install the replacement thermostat that arrived today, but I'm a little concerned that this may be the "new normal" for the Zaffiro and Amica.

jim_schulman
Senior Member

Joined: 19 Dec 2001
Posts: 3,772
Location: Chicago
Expertise: I live coffee

Posted Fri Mar 19, 2004, 6:59pm Subject: Re: PID Isomac Single Boiler Machine

dcbrown Said: I think PID would be a good option for those of us whose machines have thermostats with excessive temperature differentials. I'm finding out that accurate and adjustable isn't enough. Maybe I should hold my tongue until I install the replacement thermostat that arrived today, but I'm a little concerned that this may be the "new normal" for the Zaffiro and Amica. Posted March 19, 2004 link A well working bulb stat will have a 3F to 5F differential, just like a pressure stat, as opposed to the 15F to 20F of the click types. But the model Isomac uses has had a fairly buggy history. It's easy to tell how good it is, even without a temperature guage, a 1 to 2 minute on and off cycle during the idle period is excellent, longer is not so good, 8 to 15 minutes is back in bad old click stat territory. Some people report, they don't have to temp surf their Zaffiros, since the tstat will cycle a few times during the shot, just like the pressure stat on the Tea/Millenium. Others say they do need to wait for the top of the cycle.

Jim Schulman www.coffeecuppers.com

dcbrown
Senior Member

Joined: 13 Jan 2004
Posts: 167
Location: Chicago
Expertise: I love coffee

Espresso: PID Zaffiro
Grinder: Innova i1d

Posted Fri Mar 19, 2004, 10:03pm Subject: Re: PID Isomac Single Boiler Machine

Next week I'm ordering the PID stuff! My new thermostat looks a little different from the original one, but the differential is about the same. I checked before installing it and it has a 10F differential. The capillary tube is a much larger diameter...similar to the one on the pressure gauge. After installing it I noticed that the boiler overshoots the set value by about 5F giving a total of 15F temperature difference. I timed the cycle at 8 minutes. I can reduce that to about 6 minutes by cycling the power switch on and off so that it doesn't overshoot the setting. I suppose immersing the bulb in some heat conducting goop would help with the overshooting. I suspect the days of Zaffiros that don't need surfing are over. I never minded temp surfing my old machine. The boiler was so small it didn't take long. The combination of a large boiler and a big differential is unworkable.

GaryH
Senior Member

Joined: 24 Oct 2003
Posts: 2,526
Location: San Jose California
Expertise: I love coffee

Espresso: Isomac Zaffiro
Grinder: Macap M4 Doserless
Vac Pot: none
Drip: yes
Roaster: none

Posted Fri Mar 19, 2004, 10:38pm Subject: Re: PID Isomac Single Boiler Machine

The temperature you are measuring is the brew water? How do you measure it? Maybe there are no Zaffiros that don't need temp surfing. I haven't read any reports about very short idle boiler cycles on Coffeegeek or Alt.coffee (boiler cycle being defined as boiler element on plus off time). There are people who don't temp surf stock Silvias and there are people who don't surf Zaffiros. Of the five Zaffiro reviews on Coffeegeek I don't see any mention of any Zaffiro having a very short idle boiler cycle. This is part of Mark's Zaffiro review: "however, the Zaffiro has such a large boiler it takes some time between cycle events, and the cycling is long on its own (I've timed it at as long as 67 seconds)", "if you brew while the boiler is cycling (middle light is on)". So the 67 seconds is the maximum time the boiler element is on and the time between cycle events (when the boiler is off) is long. Well, long is 9.5 minutes on my Zaffiro. So there is no short idle boiler cycle. IMO the Zaffiro is the big brother of the Silvia. It makes much better tasting ristrettos but temp surf is still needed. My Rancilio Audrey (similar to Silvia) has a 300ml boiler and an idle boiler cycle of 10 minutes. My Zaffiro has a 750ml boiler and also an idle boiler cycle of 10 minutes (boiler on for 30 seconds, boiler off for 9.5 minutes). So the Zaffiro has a much smaller thermostat differential but it still needs to be temp surfed.

mguterman
Senior Member

Posted Sat Mar 20, 2004, 6:59am Subject: Re: PID Isomac Single Boiler Machine

I would love to know what you get and how you do the install. This is something I really want to do, but I am truly not handy. I really think that a PID modified Zaffiro or Amica is close to the ultimate for the non milk drinker. Michael

dcbrown
Senior Member

Joined: 13 Jan 2004
Posts: 167
Location: Chicago
Expertise: I love coffee

Espresso: PID Zaffiro
Grinder: Innova i1d

Posted Sat Mar 20, 2004, 8:53am
Subject: Re: PID Isomac Single Boiler Machine

I would love to know what you get and how you do the install.

I'll refresh this thread with an update. I haven't decided where to put it on the machine yet. I may just order the components and try it "breadboard" style first. I don't want to make any irreversible changes to the machine while its still on warranty.

The temperature you are measuring is the brew water? How do you measure it?

I'll refresh the other thread to answer this. I didn't mean to hijack the PID thread.

showing page 1 of 13

last page

view previous topic | view next topic | view all topics

Discussions > Espresso > Machines > PID Isomac...

updated topics

new posts

new unanswered

faq

Not Logged in: log in
Discussions Quick Jump:
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post

Forum Rules:
No profanity, illegal acts or personal attacks will be tolerated in these discussion boards.
No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum.
No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum.
Who Can Read The Forum? Anyone can read posts in these discussion boards.
Who Can Post New Topics? Any registered CoffeeGeek member can post new topics.
Who Can Post Replies? Any registered CoffeeGeek member can post replies.
Can Photos be posted? Anyone can post photos in their new topics or replies.
Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts.
Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.

Rancilio Silvia - How to

Step by step guide for easy brewing and steaming with the Rancilio Silvia
www.seattlecoffeegear.com