BOBPAULE, Nice MazzerMiniMiniHopper. If your tamper can slide down inside the MiniHopper it would reduce the "popcorn" effect. A Vivace Ergo tamper 58mm weight would be equivalent ~260 grams load of beans.
Noel Mano dell 'operatore> Macinadosatore> Miscela> Macchina espresso
I have a slight 'twist' to this idea that I just did on my mini and it's EASY, cost $10, and retains the look of a Mini, with a smaller hopper.
First, let me say that my mini fits under my cabinets unmodified with about 2-3" clearance. However, my problem was that I always had to move the grinder out from under the cabinet whenever I loaded beans, which was just about daily.
I looked for suitable smaller hoppers to no avail.
Here's what I did:
- Cut the top 3.25 inches (important) off my existing hopper by carefully sawing through it with a hack saw...I know it sounds bad, but hear me out! - Carefully 'cleaned' up the edge of the plastic that I cut to smooth it out and make it look 'manufactured'. I used a metal file, and a sand block with 100 grit, followed by 150 grit sandpaper. - Now for a lid. I went to Espressoparts.com and ordered a new lid for the DOSER for $10. It fits perfectly onto the 'cut-off' hopper. It also 'matches' the grinder because it is exactly the same as the lid on the doser.
The advantage here is that it looks GREAT. It looks like a Mazzer Mini that has a special super small hopper. It holds about 1/2 pound of beans. And most importantly, I have room to pour beans in the grinder without having to move it around every day.
I'd post a picture but I haven't figured out how to put digital photos on my computer yet (I'm a financial guy, not a computer guy). However, if you take a look at your Mini's and just imagine it with a shorter hopper, that's it. I LOVE IT!
... - Cut the top 3.25 inches ... - Now for a lid. I went to Espressoparts.com and ordered a new lid for the DOSER for $10. It fits perfectly onto the 'cut-off' hopper. It also 'matches' the grinder because it is exactly the same as the lid on the doser. ...
Brilliant! There's been a lot of talk about sawing off the top of the hopper on alt.coffee, but the idea always foundered on finding a decent looking lid. Nobody thought of sawing off the hopper so a second doser lid fits it. As with all good ideas, it's obvious in hindsight.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.