As long as we're on the subject, is there a way to adjust the deadband on a Sirai pressurestat? The only apparent adjustment screw (on top of it) sets the upper end. I'd also like to set the lower end a little higher than it is.
It's the interval between "on" and "off." For example, if the pressurestat kicks on the heating element at 0.9 bar and cuts off at 1.1 bar, the deadband is 0.2 bar. That represents a temperature variance of ~4F, IIRC.
I think i have just over adjusted my deadband adjustment screw. :-( Over zealous with the screwdriver, and it looks as though i have stripped the threads, this what i get for using a Leatherman Wave instead of a suitable screwdriver for such an intricate adjustment.
Does anyone on the group have any idea where i can buy a new Pressurestat to fit my Euro2000 Junior ?
Preferably one identical to the original as in Ian's initial post above.
No panic as we are off on holiday this Saturday for 2 weeks. :-)
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.