Posted Thu May 3, 2012, 8:29pm Subject: Issues with Silvia.
So I recived my "new to me" Silvia V1 today. way excited. It heats up and runs a shot just fine. but i get nothing when trying to steam. And when trying to run hot water throught the wand the pump kicks on but nothing comes out. Anyone have any thougths?
emradguy Senior Member Joined: 31 Mar 2011 Posts: 1,723 Location: Houston Expertise: I live coffee
Espresso: Izzo Alex Duetto II Grinder: MacapM4T, Macap M4, OE Lido,... Drip: Espro press; Aeropress Roaster: internet
Posted Fri May 4, 2012, 8:53am Subject: Re: Issues with Silvia.
Yeah, sounds like scale to me too. You may have to open the machine and disassemble some of it to soak affected parts in descaling solution. There are some good "pictorial essays" on rebuilding Silvia that you may find helpful.
Edit: Before you take it apart completely, try removing the steam wand tip and then see if that solves your problem. If you're lucky, it'll just be clogged holes. If that's the case, you probably still want to give her a good flush with a descaler such as Cafitza, JoGlo, Cleancaf or equivalent though.
Also, while you're at it, you might want to consider upgrading the wand to the articulating version. When I finally did mine, I'd wished I'd done it much, much sooner.
Posted Mon May 7, 2012, 10:13am Subject: Re: Issues with Silvia.
Tanks for your help emradguy. I was all set and ready to tear into it. got the schematics and wiring diagrams off the net and everything but thanks to your advise i pulled the steam tip. plugged with a piece of rust. Saved me a ton of work.
Posted Mon May 7, 2012, 4:08pm Subject: Re: Issues with Silvia.
emradguy Said:
Before you take it apart completely, try removing the steam wand tip and then see if that solves your problem. If you're lucky, it'll just be clogged holes. If that's the case, you probably still want to give her a good flush with a descaler such as Cafitza, JoGlo, Cleancaf or equivalent though.
Also, while you're at it, you might want to consider upgrading the wand to the articulating version. When I finally did mine, I'd wished I'd done it much, much sooner.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.
= No New Posts since last visit 