ryecarr01 Senior Member Joined: 2 Nov 2011 Posts: 44 Location: north east Expertise: Just starting
Posted Mon May 14, 2012, 1:33am Subject: help with Brasilia Gradisca
Good morning, I was wondering if anyone could share there wisdom and maybe help me out a little.
I have a Brasilia Gradisca 3 group machine, over the weekend I stripped it down, gave it a deep clean, full descale etc.
I have put it all back together today to find out that my autofill is not working, it will sometimes kick in, either for a second, a few seconds or just not at all. I can manually fill the boiler but it was working fine before??
Also one of the group panels is completely unresponisve, all the lights flash on initial start up and the left and the right work fine, however the one in the middle does nothing, if you press a dosing key the green led light comes on but nothing happens and it goes out as soon as i take my finger off the button.
i have double checked the wiring, everything is as it should be ???
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 6,825 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Veneziano A1 Grinder: Many different commercial Vac Pot: 40s era Silex Drip: Milita, Bunn&Curtis... Roaster: Cast iron pan, gas burner
Posted Mon May 14, 2012, 5:40am Subject: Re: help with Brasilia Gradisca
Remote trouble shooting is a hard thing to do but, off the top of my head, if it was all working before and there are issues now, you might have a plug that looks like it is connected but may not be fully seated. Electrical problems can be hard to trace but I would start with the plugs and connections. YMMV!
In real life, my name is Wayne P.
Feed the newbs, starve the trolls and above all enjoy what you drink!
Posted Mon May 14, 2012, 7:36am Subject: Re: help with Brasilia Gradisca
- Loose, bad, or disconnected ground connection - Loose wire connection - Broken circuit board in black or control/keypad - If it was hot and dry it could be static damage to electronics
Check that the autofill probe is insulated from the boiler (not grounded when thr wire is disconnected. Disconnect level probe wire to see if autofill starts. Ground it to boiler to see if the autofill stops.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.