ryecarr01 Senior Member Joined: 2 Nov 2011 Posts: 44 Location: north east Expertise: Just starting
Posted Fri May 18, 2012, 3:35am Subject: Elektra Maxi Programm key
Ok so i am currently on with an Elektra 3 group fully automatic. it has a key port ont he facia panel which has a lead going from the back of it and into the main board of the machine.
Am i correct in assuming this is to lock out people from programming the machine and must be inserted if adjustments are to be made to its programme panel?
I do not have the key (although i guess i could buy one) but if i short out the wire into the board will this act as the key and allow me to go ahead with the programming or is this likely to end in disaster and a faulty board? what happens if i simply remove it from the board?
stefano65 Senior Member Joined: 30 Oct 2004 Posts: 1,417 Location: Eugene OR Expertise: Professional
Espresso: Vibiemme,Elektra, Grinder: Vario,Macap, Vac Pot: not Drip: not Roaster: not
Posted Fri May 18, 2012, 5:59am Subject: Re: Elektra Maxi Programm key
of course for fully automatic you mean automatic (with dosing volumetric programming) what the date on your machine a maxi should be from pre 97,
you will need to key (or.............) to access the programming, all 4 (2 singles and 2 double ) will need to be programmed, which is different from the newer style 7 buttons (only single do then the double will double the volume) programming the left the other 2 dose pads (if wired correctly) will copy the left one if you have a 5 buttons configuration most of the keys are the same up to 05 or so you can see them on our web page
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.