alekk Senior Member Joined: 7 Dec 2012 Posts: 22 Location: Paris Expertise: I love coffee
Posted Fri Dec 7, 2012, 10:00am Subject: seal europiccola?
just bought my first (used) Europiccola and am beginning to play with it. Have just noticed that one of the seal is not tight and is actually moving quite a lot. It does not seem critical, but I am wondering if this can affect the pressure and ruin the overall process. It is the seal No 4 in the attached picture.
stefano65 Senior Member Joined: 30 Oct 2004 Posts: 1,415 Location: Eugene OR Expertise: Professional
Espresso: Vibiemme,Elektra, Grinder: Vario,Macap, Vac Pot: not Drip: not Roaster: not
Posted Fri Dec 7, 2012, 2:24pm Subject: Re: seal europiccola?
so basically you are saying that your boiler is twisting on the base? it is somehow a common issue, no it will not affect the pressure but it will not get any better with time, you could actually damage some of the bottom components if it will twist drastically.
When operating an europiccola every time you insert and engage the portafilter, has you are turning it to the left you need to counter balance on the lever to the right, saying so to now take care of the issue is a little pain, you need to get to the bottom of the machine, remove the heating element (3 bolts) then re-tighten the flange, without the special tool your best option will be to gently tap on the flange edges with a wooden dowel and a rubber hammer untill tight, I normally use a litttle loctite to hold it there once position, be aware that if you have a pressurestat on your unit the pipe might need to be reposition since you 'll be moving the mounting holes
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.