So my vacuum breaker started hissing at me a week or so ago. I went ahead and descaled the machine in the hopes that maybe that would fix it, then disassembled the breaker and soaked in a citric acid solution over-night, but its still hissing. I know replacements aren't terribly expensive, but I though the o-ring is probably what needs to be replaced (not much to go wrong elsewhere, right?). Does anyone know where I could get any to attempt replacing the old one?
SStones Senior Member Joined: 24 Nov 2012 Posts: 209 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Sun Nov 25, 2012, 9:12pm Subject: Re: ECM Giotto Classic - vacuum breaker replacement (or O-ring?)
Only since no one else has responded, I'll give you my bad advice followed by the good advice... Take the valve apart, being sure not to let the tiny circlip fly across the room. Swear when the circlip flies across the room. Carefully roll the o-ring out of it's groove and off the valve, then reinstall it upside-down with a rub of food-grade grease.
It might last a month, so look for a parts place... because here's the good advice. You will need to replace that o-ring, I have no idea where to get it in washington, but maybe you'll find someone local. Anything that is so close that you can't see a difference should work. Else, you could just replace the vacuumbreaker with any you can find from any parts store, so long as the threads are the same. (Very standard to most HE machines).
I know this advice isn't very useful. Maybe a Washington person with a good parts link will take it from here.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.