Markarian Senior Member Joined: 27 Jun 2012 Posts: 658 Location: Seattle Area Expertise: I love coffee
Espresso: ECM Technika IV Profi WT-WC Grinder: Baratza Forte AP, HG One Vac Pot: Bunn Trifecta MB Drip: Moka, Aeropress, Hario V60 Roaster: Behmor 1600
Posted Sun Mar 31, 2013, 10:37pm Subject: Pump Ramp Time
So I was curious about time it takes between turning the pump on and first drip. On my Oscar, it's a really long time. It can last between 7-10 seconds, but the shot isn't necessarily choked. However, if I start a shot RIGHT AFTER a boiler autofill cycle, I get an almost immediate flow of espresso. Is this just how the Oscar works, or is my flushing routine messing things up?
When my boiler is full, it takes ~5 seconds. If I use the steamer to make a latté and don't manually refill the boiler afterwards (my machine does not autofill, filling only occurs when pump runs), it might take 10 or even more seconds. I've made it a habit to pull some water through the grouphead after steaming as shot quality suffers when I start with a partially full boiler due to temperature inconsistency.
I don't recalling pulling a shot right after boiler fill but if the heater kicks on it slows down my pour due to voltage I believe. I was thinking heater when I said this. I believe it will not fill the boiler while pulling.
Mine takes 3-5 seconds to start dripping and if the pump fills the boiler during the pull I get slower flow not more....
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.