New at this ,I have a Astoria argenta Single group machine. I just replaced the pump this is the first time it has worked in a few months. Got this from a friend. This is also my first machine. When I turn the switch on to heat the boiler the pump comes on for about 20 sec. or so and shuts off then the lights on the 4 dispensing and program/ stop buttons all flash and will keep flashing. None of the buttons function. I cannot find anything in the service manual about this, does this mean anything? If I use the dispense switch it works. Help/Thanks
Well found out the level probe on the boiler was not seeing a level. Thought the boiler was empty. when the boiler did actually have water in it. Put a jumper wire across the probe to ground and now it thinks the boiler is full. no flashing lights. will be pulling the probe for a cleaning or replacement. Thanks
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.