goodlookin1 Senior Member Joined: 12 Apr 2010 Posts: 14 Location: Sacramento, CA Expertise: I live coffee
Espresso: Expobar Office Grinder: Vanelis Minipro III
Posted Sun Aug 18, 2013, 11:26am Subject: HX Machine Losing Pressure at the Group Head?
My Expobar Pulsar seems to be losing BAR pressure more and more as the days go by. It's not getting the thick espresso that I normally do and it's coming out slower and slower. Amazingly, the shots are not tasting all that bad, but I want to get my machine in tip top shape.
Could this perceived loss of pressure be coming from the vibe pump going bad? Just this morning when I turned it on, I heard the typical noise that is pumping water into the boiler, but it had a half second lull in the middle of the boiler being pressurized where it sounded almost as if there wasnt enough power getting to the machine. I know the power was fine, but it was like the pump slowed down for a half second and got quieter. It ramped up again shortly after that, and this is the first time I've heard that lull. But this, in conjuncture with the perceived weaker pressure......what do you think could be going on?
I haven't had to replace the pump and I've had this machine for 5 years, and the people I bought it from before me had it for a year and a half. Is it time to replace?
Coffeenoobie Senior Member Joined: 11 Dec 2011 Posts: 2,972 Location: PNW Expertise: I like coffee
Espresso: N S Oscar Grinder: K30 & Vario W
Posted Sun Aug 18, 2013, 11:30am Subject: Re: HX Machine Losing Pressure at the Group Head?
It could be the vibe pump. 5 years is not an unreasonable amount of time for them to die. For 50$ or so it is good to have a spare on hand even if it turns out not to be the issue. Have you descaled it?
Buying advice: GRINDER GRINDER GRINDER. Don't cheap out on the grinder.
Posted Sun Aug 18, 2013, 11:38am Subject: Re: HX Machine Losing Pressure at the Group Head?
Before replacing teh pump: Check for a clogged or obscured intake filter (if so equipped). Check of kinked hoses. Check the voltage at the outlet. Check for a leaky pressure relief valve. Check for a leaky 3-way valve.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.