SStones Senior Member Joined: 24 Nov 2012 Posts: 477 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Wed Jan 8, 2014, 7:21pm Subject: Re: LA NUOVA ERA CUADRA
The two connectors right beside the relay are the normally closed switch (So one is always live (from the "always live when on" wire that connects power-switch to Green-Bulb to Relay to P-Stat).). The other is switched power, so connected to the load (Element Phase)
The other two connections are going to be the neutral tab (always neutral (Probably a blue wire that jumpers to other blue neutrals like the bulb and the neutral-blue of the element)) and the Pressostat signal which probably is extended on a wire, wired to the board the relay is in.
Is that what you're asking? Sorry, I must be missing something. Are you looking for a schematic of something that makes this more complex in some "Upgrade" rewiring?
captcloudbuster Senior Member Joined: 8 Jan 2014 Posts: 2 Location: san diego Expertise: I live coffee
Posted Wed Jan 8, 2014, 9:52pm Subject: Re: LA NUOVA ERA CUADRA
THANKS FOR THE REPLY, NO I NEED SIMPLE. I TOOK OFF THE RELAY 6 MONTHS AGO WHEN THEY WERE NOT AVALIBLE AND BYPASSED TO SO IT WOULD WORK WITH OUT THE RELAY. NOW I HAVE ONE AND WANT TO INSTALL IT AND LOST THE PICTURE I TOOK OF WHITCH WIRES WENT WHERE. THERE ARE 3 TERMINALS ON THE RELAY ITSELF 2 SIDE BY SIDE AND 1 ON THE END,THERE IS ALSO A PLUG OFF OF THE WIRE AT THE END. WHAT I REALLY NEED IS WHAT COLOR WIRES GO TO WHICH TERMINALS. THANKS
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.