Posted Tue Jun 15, 2004, 11:00pm Subject: Re: Anyone built a knock box?
I got plumber friend to source me a piece of 150mm PVC pipe + end cap, cut the pipe at an angle (10cm drop), drilled a couple of holes and then made a crossbeam of dowel covered in PVC tubing with chair leg rubbers as end pieces/shockmounts. I cover it with a small plastic bag when not in use to reduce odours.
Posted Wed Jun 16, 2004, 6:15am Subject: Re: Anyone built a knock box?
We own one of these. I am contemplating building some for friends as gifts.
It is just a small rectangular stainless pan about 2 inches deep. They drilled a hole on each side and ran a 1/2 inch threaded rod through it with a nut on each end. The 'knock bar' rubber piece is just a piece of high pressure hose cut to length with the rod through it.
The frame is a simple wooden frame a bit deeper than the pan, and the pan just sits in it...just lift out the pan to empty and clean. It has been being knocked about our counter for a couple years now.
Posted Fri Aug 27, 2004, 7:07am Subject: Re: Anyone built a knock box?
Your friend does nice work short_black! If I were you I'd put some rubber around it, because a PVC pipe wouldn't absorb any of the shock. You might not dent the wood by hitting it directly, but I'd think over repeated heats you'd still have a chance of cracking it. Rubber would help ameliorate this a bit.
Posted Fri Aug 27, 2004, 7:26am Subject: Re: Anyone built a knock box?
short_black, if you look at my effort further up, you will see my bar is covered with a piece of clear hose. This cushions the knocks and keeps the wood clean. If your bar is not removable, you could slit a piece of hose so it wraps around the bar. It will look nicer than PVC pipe, too.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.