jdrock Senior Member Joined: 24 Jan 2011 Posts: 30 Location: HK Expertise: I live coffee
Posted Sun Apr 7, 2013, 5:57am Subject: Vibiemme Domobar Double Boiler PID (DD) and Eric Thermometer
I just got myself a Eric Thermometer and installed on my DD. I tried to read the brewhead temperature from the Eric Thermometer and it gave me a total different result when flushing and brewing. Here's my setting, 1 hour warm up, PID=92C, Offset=10C, brewhead temperature=86C.
a) Without portafilter and flushing, temperature went up to 96C and drop to stable 92C. b) When actual brewing 30 second 19g coffee, temperature went up to 96C and drop to stable 85C.
In order to obtain the brewhead temperature at 92C, I need to increase the PID to 98C and during the brewing cycle, the max temperature at the brewhead reached 100C and quickly drop to 92C throughout the whole 30 seconds brewing cycle.
I know the theory that due to the restriction of the coffee puck and brewhead temperature drop. So the question is should I maintain the PID according to the flushing or brewing?
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 8,206 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Sun Apr 7, 2013, 1:41pm Subject: Re: Vibiemme Domobar Double Boiler PID (DD) and Eric Thermometer
To answer your last question, with a question, do you drink your espresso from the flush or the brew? If a pid would make a difference on my machine and if I had one, that is where I would take the readings from.:-)
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Posted Tue Apr 16, 2013, 1:09pm Subject: Re: Vibiemme Domobar Double Boiler PID (DD) and Eric Thermometer
I flush until the temp reaches an indicated peak temperature then stop the flush. How do I know what that is? A bit of practice taught me. After that, I don't look at the thermometer. I don't care what it shows during the brew. I only care about the taste of the espresso. I have the offset adjusted so that the display shows the temperature of the flush temperature's peak previously mentioned. That also is about the same peak temperature that is indicated during the flush. If you are concerned about the brew temperature at the coffee you will need to invest in a Scace device or similar tool. Other than that, ignore the temperature change during the brew cycle and use taste as the only indicator as to what adjustments need to be made. One man's opinion.
danutco Senior Member Joined: 15 Dec 2012 Posts: 7 Location: Brasov, Romania
Posted Sat Apr 27, 2013, 3:57am Subject: Re: Vibiemme Domobar Double Boiler PID (DD) and Eric Thermometer
discussing about temperature measurements in the brewhead (E61 in my Bezzera Magica), is it true that the displayed temperature does have significance only during the time the brewing valve is open, that is the water is flowing over the sensor? do you use the values indicated on the brewhead thermometer while the machine is idling? is there some consistency from machine to machine, as the sensor is only in hot air? thank you...
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.