gribbly Senior Member Joined: 14 Sep 2013 Posts: 5 Location: Seattle Expertise: I love coffee
Espresso: Ascaso Dream Up v2.0 Grinder: Baratza Preciso
Posted Mon Sep 16, 2013, 8:03pm Subject: Re: Questions about operating my new Ascaso Dream Up
Thanks for the responses!
I flush through the group to rinse/cool and heat the cup; have to expel the extra hot water somewhere....
Interesting. If I try this on the Dream I get water and a huge cloud of steam everywhere if portafilter is empty. If the portafilter has the spent puck still in it, it's more manageable but I had an incident where I didn't fully de-pressurize, and when I removed the portafilter it blew grounds everywhere. So at least for now I think I'll stick to purging through the steam wand - less to go wrong for a beginner like me!
Warming the group doesn't seem to be too big of a deal - it's usually hot to the touch... I find it drips a little bit as the boiler gets up to steam pressure, so that seems to get it nice and hot. Then once I've purged, I run a second or two of water through it before I remove and dose.
Seems to be working out.
As it turns out, it looks like the Dream has a thermometer where I thought a pressure gauge, so easy to see where you are, and you don't need the Polder.
I think older versions of the Dream had a pressure gauge. But yes, mine has a temperature gauge which seems pretty handy. Something I've noticed is the "momentum" of heating... i.e., if I turn on the steam switch and let it start heating up, then turn the steam switch off again the temp will keep creeping up for a good 10-15 seconds after the switch is off. Definitely helps to learn the timing of the machine, although I'm not being too precise with my temps just yet.
Posted Mon Sep 16, 2013, 8:17pm Subject: Re: Questions about operating my new Ascaso Dream Up
If you leave the spent puck in while steaming, this will bake the coffee residue in the group and foul your next shot with burnt rancid coffee residue taste. I recommend whatever your SBDU routine, get the group cleaned right after the shot, before steaming.
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 7,734 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Wed Sep 18, 2013, 6:38am Subject: Re: Questions about operating my new Ascaso Dream Up
After steaming in a SBDU, I do open, well leave the wand open and turn the pump on to fill the boiler until water exits. Is this the best way to do it? well, IDK, it is the way I have always done it, Frost may have a better way. The main thing is to keep the heater from getting "dry" and thus over heating.
Do pull the PF before letting the machine heat up, cleaning a burnt puck is not nice. Even now, I may get busy and forget to clean the PF, OK not often but it does happen. By the time I find it, sometimes hours later, it is a baked on rock. I find the easiest way to clean is to just pull another shot through the rock, this will get it wet again and cleaning is much easier. UH, needless to say, this cleaning shot is not consumed.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.