Our Valued Sponsor
OpinionsConsumer ReviewsGuides and How TosCoffeeGeek ReviewsResourcesForums
guides & how tos
How to Brew Ice Drip Coffee - a How-to
How to Brew Ice Drip Coffee
Author: Mark Prince
Posted: July 31, 2011
How-To rating: 9.2
feedback: (11) comments | read | write
Click for larger image

During these dog days of summer, iced coffee seems to be the rage and there are few better theatrics for coffee brewing than the Japanese-styled iced coffee dripper tower that seem to be popping up in more and more cafes in North America. The good news is, you can bring this brewing method home if you like and have the exact same style of coffee.

Ice brew results in a pretty mellow cup of concentrated coffee elixir. The brews are usually concentrated and require water and ice to bring the resulting cup down to a normal-strength cold brew beverage. This brewing method usually results in very mellow, very muted acids (pretty much undetectable), and a nice rounded body taste. Unfortunately, this brewing method tends to obliterate most specific taste nuances in various types of single origin coffees: the resulting brew usually just tastes like "coffee". That said, you still want to use a very good quality roasted coffee with this brewing method. We've found that using grocery-store whole beans or preground commodity coffee results in a pretty stinky brew. Using a good middle-of-the-road specialty coffee that is freshly roasted (within 10 days or less) always gives us the best cup.

This brewing method takes a long time. In the two methods we'll describe visually below, it can take between 3 hours and 5 hours (or longer) to complete a brew cycle. The coffee does keep in the fridge for at least a day though without much discernible loss in quality, so all summer long you can do a brew, and drink yesterday's brew from the refrigerator.

Theatrics of Iced Coffee

In Japan, these kinds of brewers are seriously the rage. Some towers can be as tall as 1.5 meters or higher, brewing into multiple vessels. In Vancouver, 49th Parallel's cafe features two of these Japanese commercial iced coffee brewers, sitting majestically on the back bar counter. In other cafes around the US and Canada, you can see them sitting in display windows.

They get such attention because of the ornateness of the devices. Usually the most ornate bits are where the ground coffee goes. They are often made from mouth-blown glass, and usually feature a curly tube section where the brewed coffee slowly winds down and drip, drip, drip falls into a waiting carafe. The drip control mechanisms are pretty fancy too - some of them are made from ornate brass with old-timey levers or dials to control the flow of water dripping onto the bed of coffee. And on top, there's the large glass vessel where a up to a kilogram (or more) of ice goes in.

Do they need to be so ornate and theatrical? Of course not; and some of the design elements - like the curly tubes at the bottom of the coffee grounds holder - are certainly not necessary to producing a better brew. But iced drip coffee makers do need certain design elements to help in brewing a better coffee. The good news is, home units you can buy almost always feature these crucial elements. They include:

  • A Drip Control Mechanism. This is usually a series of rubber or silicone disks that can be squeezed or unsqueezed by turning a screw-in lever or dial. They can control the flow of water down to as slow as 1 drip every 10+ seconds.

  • Water Distribution. A method to evenly coat the bed of ground coffee; if you just let the water drip into a bed of coffee unimpeded, it would quickly channel a singular path through the coffee leading to overextraction on the water path, and underextraction elsewhere.

  • Brew Filtration. Some kind of filter at the bottom of the bed of coffee. Some brewers use a cloth or paper filter. Others, like the Hario Pota, have the filter built into the metal ground coffee holder.

How Iced Coffee Brewers Work

Click for larger image

The Japanese styled Iced Coffee tower (and the Hario Pota, detailed below) work on the principle of a very drawn out extraction time with ice cold water to create a concentrated coffee elixir. The process is slowed down by several factors: the ice slowly melting delivers water at a slow pace; the dripper mechanism is controlled to do 1-2 drops per second on average; the volume of ground coffee in a tall vertical canister shape further slows down flow rate through the bed of coffee; and in the case of the tall towers, the curly tube underneath creates a slow down in the extracted brew, possibly causing some additional mixing and evenness to the brew. (though I am entirely skeptical about that last point).

Iced water has a different extraction process than hot water. It reacts differently, down to a molecule level, with the ground coffee when compared to traditional hot water brewing. Some elements (including caffeine) are much more resistant to extraction with cold water than they are with hot (though the extended brewing times ensure most of the coffee's caffeine will extract). Other elements that contribute to things like acidity react differently with iced water.

Because of the differences, ice drip brewers tend to produce a brew that is almost acid free (in terms of taste), with a very pleasing creamyness and good viscous body. Coffees that are particularly spicy or chocolatey tend to show well in iced drip brewers, but so do fruity natural coffees. It is hard to distinguish specific single-origin tastes in a brew of ice-drip coffee, but I can remember putting a super-fruit bomb Beloya through an ice drip process a few years ago, and getting a lot of the fruity characteristics in the brewed cup.

These brewers also produce a pretty concentrated elixir. It's nearly twice the "strength" of a normal hot-brewed drip coffee. This is by design based on how much ground coffee you're using while brewing, and it means the finished brew can easily handle dilution by the addition of ice or water or both later on when drinking.

The Basics

For both brewing devices described below, we have some basic parameters for setting up the brew.

  • How Much Coffee? As always, this is according to taste, but in our ice drip coffee tower, we like a ratio of 12g of coffee per 120ml (4oz) of brewed coffee. The carafe in the tower unit holds about half a litre, so we use about 60g of ground coffee.

  • What Grind? Again, you can tinker with this a bit depending on the type of coffee you're using and how strong you want the resulting coffee to be, but we always start with a normal drip grind and adjust it a bit finer depending on the coffee used.

  • What Type of Ice? Since water makes up almost all the brewed elixir, you want the best quality ice you can use. Don't use grocery-store bags of ice, and don't use ice that's been in a tray in the freezer for months on end. Use fresh ice possibly made with filtered water and add cold filtered water as your starter in the brew.

  • What Drip Speed to Use? A lot of ice drip coffee manuals we've seen suggest a drip speed of around 1 drip every 1.5 seconds or so. We've tried brews doing 2 drips per second, all the way to 1 drip every 5 seconds, and find the 1.5 second per drip ratio (about 40 drips per minute) to be a good starting point. You also want to go back to the brewer midway through its brew, since the lower water volumes in the top carafe may require an adjustment on the drip time mechanism to speed things up a bit and maintain the 40 drips per minute speed.

  • How to Dilute? By the time an ice drip brewer is done its thing, the resulting elixir is a lot closer to room temperature than it is to freezing temperatures. To get it cold again, you can do several things - put the carafe in the fridge (or transfer the brew to another jug you put in the fridge), or just pour some into a glass right away and add a lot of ice. Each method provides a different dilution amount because of the elixir's staring temperature. Like anything else in coffee, do it to your preferred taste but here's some starting parameters: room temperature elixir - fill glass with ice, pour in concentrate, add sweetener if desired, stir; refrigerated elixir - add ice cubes, cold water, sweetener (if desired), stir.

  • Should I Use Sugar? You certainly can if you like, since the colder something is, the harder it is for most taste palates to distinguish sweetness. We recommend adding a very small amount of easily-solvable sugar, tasting, and adjusting so you end up with a balanced (not sweet) tasting beverage.

The Ice Drip Coffee Tower How To

In this first how to, we'll walk you through the process of using an Iced Drip Coffee tower, ta device usually manufactured in Japan or Taiwan where they are extremely popular. The model we're demonstrating is no longer available, but several similar models are available in North America today, including the Yama Cold Dripper ($215, Amazon) and the Hario Clear Dripper Coffee Maker ($245, Amazon). You can download a PDF of the instructions for the Yama Ice Drip brewer here.

Step by Step How To, Ice Dripper Brewer

Click for larger image Click for larger image Click for larger image
Typical Ice Tower Brewer
This particular model is no longer available for sale, but features much of the same design that most tall towers have.
Adding Coffee
We use a 12g / 120ml brewed coffee ratio for deciding how much coffee to use. In this brewer, about 60g is used to brew roughly 600ml total volume. Grind is a normal drip grind.
Adding filters
Some of these drip towers also advise using a paper filter disk on top of the ground coffee to help even the distribution of water evenly over the grounds. A cloth filter device is in the bottom of the coffee area.
Click for larger image Click for larger image Click for larger image
Adding Ice
You want to fill up the upper chamber as much as you can with ice. Remember, you can always stop the brew simply by adjusting the dripper mechanism.
Adding Water
Add some water to kind of "kick start" the brew - not much. We fill the top globe about 1/3 of the way at the start.
Adjusting the Dripper
Here, the dripper mechanism is adjust so it does about one drip per second. A brew in this device takes about 4 hours.
Click for larger image Click for larger image Click for larger image
The Drips
The mechanism can precisely control how fast or how slow drips come out.
Starting to Brew
The coffee's been saturating for about 20 minutes by htis point, and brew is finally starting to come down the (mostly theatrics) curly spout at the bottom.
First Drips
The very concentrated coffee elixir is now flowing, slowly into the carafe.
Click for larger image Click for larger image Click for larger image
3 hours in
3 hours in, and most of the ice is melted. Depending on the size of your cubes or how much has been brewed, you can add more icecubes to the top vessel.
Almost done
The brew is nearing the end, with about 400ml brewed up to this point. About one more hour to go.
Almost done
Near the end of the brew, you can see how diluted the final drops are.

 

Hario Pota Dripper How To

The Hario Pota is a much more compact (and still quite elegant in its own way) ice drip brewer. It performs almost identical to the Ice Drip Tower versions, but in a much more compact body, and because of the wider ground-coffee container, can be brewed a bit faster - around 2 to 3 hours vs. the 4-5 hours for the tower versions. We set the drip to around 1 per second, which cuts about 33% of the brewing time, compared to the tower version.

The Pota can even be placed in the refrigerator while doing its thing. It is made from glass, steel and copper parts (as pictured) but the more recent versions feature bronze instead of copper. The dripper mechanism can be a bit tricky to use, but once you get the hang of it, it's just as easy as the tower models. The Hario Pota (Amazon Link) goes for around $260 USD. Downloadable instructions for the Pota are here.

Step by Step How To, Hario Pota Brewer

Click for larger image Click for larger image
Hario Pota Ice Brewer
The Pota is much more compact than the ice drip towers, and can easily fit in a fridge while brewing (resulting in a cold brew when done)
Parts of the Pota
The parts include the ground coffee chamber (left) and water "spreader" (right) which provides a more even water flow over the ground coffee. It's not as even as a paper filter over the grounds, but you can add one inside the chamber if you like.
Click for larger image Click for larger image
Adding ground coffee
Adding about 50g of coffee here, in order to brew about 500ml of concentrate.
Spreader in place
The water spreader is back in place, waiting for the rest of the unit to be assembled.
Click for larger image Click for larger image
Adding Ice
The top chamber is filled with ice from our filtered ice maker.
Adding water
Adding water to kick start the drips and brewing process
Click for larger image Click for larger image
First brewed coffee
The first drips of brewed coffee are coming out. Note the grounds in the pot - it's not much but since the filter is just a steel filter built into the bottom of the grinds chamber, some will initially fall through.
Nearly done
The Pota has been going for about 2.5 hours by this point, and is about 80% done its brew.
Click for larger image Click for larger image
Drips
The drips are pretty precisely controlled on the Pota - you can adjust from one every 10 seconds or longer, all the way down to several drips (or an even flow) every second.
Finished brew
The Pota is done, about 3.5 hours after starting. Remove the top assembly, grounds chamber, and serve from the bottom carafe.

See our other Guides and How Tos

How-To rating: 9.2
Author: Mark Prince
Posted: July 31, 2011
feedback: (11) comments | read | write
This how to and all its parts are owned by CoffeeGeek.com and are covered by the Creative Commons license.

For information on reproducing any part of this article (or any images) or if you would like to purchase a printed version of this article for commercial or private use, please contact us at info@coffeegeek.com for further details.

Creative Commons License
Interactive
Search
Login Password
forgot pw | signup
quickNav
advertisement
sponsorad
Home Espresso Machines
Watch videos with Gail & Kat, Rocket, Jura Capresso, Saeco, Rancilio, Quick Mill, Nespresso
www.seattlecoffeegear.com
sponsorad
Rocket R58 Double Boiler
Rocket Espresso R58 Double Boiler -  Everything you need for the perfect shot!
www.seattlecoffeegear.com
sponsorad
Donate to Coffee Kids
Coffee Kids works with farming communities around the world, improving lives. Donate today.
www.coffeekids.org
Home | Opinions | Consumer Reviews | Guides & How Tos | CoffeeGeek Reviews | Resources | Forums | Contact Us
CoffeeGeek.com, CoffeeGeek, and Coffee Geek, along with all associated content & images are copyright ©2000-2014 by Mark Prince, all rights reserved, unless otherwise indicated. Content, code, and images may not be reused without permission. Usage of this website signifies agreement with our Terms and Conditions. (0.171261072159)
Privacy Policy | Copyright Info | Terms and Conditions | CoffeeGeek Advertisers | RSS | Find us on Google+