Our Valued Sponsor
OpinionsConsumer ReviewsGuides and How TosCoffeeGeek ReviewsResourcesForums
consumer product reviews
prosumer / professional espresso machine reviews
Wega Atlas - Ken Justice's Review
Posted: May 2, 2007, 11:52am
review rating: 9.0
feedback: (0) comments | read | write
Wega Atlas
Where to Buy
Arrow No Business Listed
 List your business site here.
About "Where to Buy"

More About This Product
Arrow The Wega Atlas has 3 Reviews
Arrow The Wega Atlas has been rated 8.53 overall by our member reviewers
Arrow This product has been in our review database since November 30, 2001.
Arrow Wega Atlas reviews have been viewed 24,302 times (updated hourly).

Quality Reviews
These are some of the best-written reviews for this product, as judged by our members.
Name Ranking
Ken Justice 9.00
Brent . 4.80
Tim Vogt 3.83

  Next Review
Ratings and Stats Overall Rating: 9.0
Manufacturer: Wega Italy Quality: 9
Average Price: $3,700.00 Usability: 8
Price Paid: $500.00 Cost vs. Value 10
Where Bought: eBay Aesthetics 9
Owned for: 3 months Overall 9
Writer's Expertise: I love coffee Would Buy Again: Yes
Similar Items Owned:
Bottom Line: Beautiful & robust machine makes a great cup, good enough to run a small coffee shop.
Positive Product Points

Simple single switch operation, huge boiler / endless steam, easy to clean, large cup tray holds all sizes, easy to disassemble and repair, nice color sceme & design, red metal flakes imbedded in color panels add a nice touch, replacement parts readily available

Negative Product Points

No thermometer, large (almost 2 feet wide) and heavy (135#), uses lots of electricity (I left it on for a month and got a $100 electricity bill)

Detailed Commentary

After messing around for a couple years with a couple Francis Francis X1's, a Gaggia Coffee, La Pavoni ECP-8, I decided to get serious. What precipitated me getting the Wega was a visit to Ritual Roasters in San Francisco where I realized that the coffee I was making at home could be a lot better, ok it was pretty bad. I decided to get a single group commercial machine and started shopping eBay and doing research.

I found this Wega Atlas 1 manufactured in 2001, purchased it for $500, paid almost as much to have it trucked to Los Angeles due to the fact that it weights 135#, not 75# as is described online. Possibly this is an older style with different guts. It arrived broken (despite the sellers claim to the contrary) with a massive leak from a cracked Parker valve, bad head hasket, clogged screem. I ordered replacement parts, and installed them myself (without any prior knowledge of the internal workings of espresso machines). Once that was fixed, I found the group head was hopelessly clogged with old coffee and had to disassmble it for a thorough cleaning, which was also not very difficult and required 2 or 3 tools.

After the repairs, it worked fine, made nice coffee. After tweaking my Isomac Gran grinder and trying several different roasts from different places, I was able to find a good balance and my espresso started getting better and better. I did have a few issues setting it up, figuring out how the plumbing worked because its not marked on the machine, but that probably would not have been an issue if it came with instructions.

Buying Experience

Overall it was a bit of a saga to endure, but in the end I have a great machine that I have learned to repair myself, and between the purchase price, shipping and repairs I am into it for $1200, which is not bad for a model that runs almost $5000 retail.

Three Month Followup

Still love this machine, sitting here with a very nice almond latte. Overall, its been a very positive 3 months, although one morning the pump went out, I had it fixed by the following morning, I think I needed to remove a total of three screws to get it out. One average, I make two shots a day (one morning, one after work), and much more on weekends when company is over. The shots are very consistent, I've learned how to do a decent micro-foam.

One thing that's really nice about this machine is its simplicity. I think even a total novice like me with a screwdriver and a adjustable spanner (monkey wrench) could remove the boiler in a couple hours. I also appreciate that there's room to work inside the machine, with the cup warmer and just one side panel off, you can get to most of the plumbing on the whole machine and unbolt anything. There's room for your arm and a wrench without having to do yoga.

I'm not a clean freak, so I run Puly-Caff through it roughly once a week, and do the steam wand with Puly-Milk at the same time. 15 minutes of maintenance keeps the flavor clean and consistent. I plan to clean the boiler thoroughly at some point, but its a weekend project and I seem to be using it more heavily on weekends.

In short, I think this machine is easy to use, easy to fix and makes exceptional coffee. What I saved in buying it used, I seem to have spent in 'sweat equity' but in the process I've learned about what makes an espresso machine tick. If I had to do it all over again, I would buy the same machine, if I had $5000, I would buy a new one in a second.

  Next Review
Write a Review for this Product
review rating: 9.0
Posted: May 2, 2007, 11:52am
feedback: (0) comments | read | write
Login Password
forgot pw | signup
Commercial Equipment
Nuova Simonelli, La Marzocco, Rancilio. Nationwide installation. Instant financing options.
Learn @seattlecoffeegear
Learn all about coffee, watch videos, read how-to articles.
Home | Opinions | Consumer Reviews | Guides & How Tos | CoffeeGeek Reviews | Resources | Forums | Contact Us
CoffeeGeek.com, CoffeeGeek, and Coffee Geek, along with all associated content & images are copyright ©2000-2015 by Mark Prince, all rights reserved, unless otherwise indicated. Content, code, and images may not be reused without permission. Usage of this website signifies agreement with our Terms and Conditions. (0.195359945297)
Privacy Policy | Copyright Info | Terms and Conditions | CoffeeGeek Advertisers | RSS | Find us on Google+